
both are pleased.

I look good anywhere.WKPoor wrote: Fine machine and you look good on it too!![]()
![]()
that was done by a local concrete finishing company, that has a good reputation. i didn't count the rebar, but there is quite a grid of rebar in it. The owner of the finishing company happens to rent the farm next to us, and I see him 3 or 4 times a week, so I am not too worriedRudi wrote:John:
That looks like a nice slab.. anchors and all. I assume there is tons of steel in that floor![]()
![]()
Don't ask why I know to hope there is....
![]()
![]()
![]()
yup, it has a couple seals that need replaced, but an old H always does, even after you replace them all.SteveB wrote:John, I see that EJ has already marked his territory.
I knew it had one leak under the liftall unit, but couldn't remember as many as showed in the picture. When i went down to the shed floor later, they had all evaporated. DUH!! I had washed it just before the picture and water was dripping off.SteveB wrote:John, I see that EJ has already marked his territory.
Return to “Farmall H, HV, Super H, 300 & 350”
Users browsing this forum: No registered users and 0 guests