Farmall H, HV & Super H, 1939-1954
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Tue Feb 05, 2008 5:50 pm
whqt is the napa number ?
Tue Feb 05, 2008 7:04 pm
there are two different filters for the H's... one is taller and not as big around if I remember right, I cant' remember for sure, been a while since I ordered one...
Fri Feb 08, 2008 6:22 pm
My 1950 H takes #1172.And yes there are 2 differnt ones.I don't remember the other Number!!Kevin
Fri Feb 08, 2008 9:22 pm
KETCHAM wrote:My 1950 H takes #1172.And yes there are 2 differnt ones.I don't remember the other Number!!Kevin
That would be the number for the short one, later version.
Fri Feb 08, 2008 9:43 pm
Just checked the tall one[7.5 as opposed to 5.50] would be 1125.
Sat Feb 09, 2008 12:35 am
LiL' Red wrote:Just checked the tall one[7.5 as opposed to 5.50] would be 1125.
Would the taller one give me more oil pressure ?
Sat Feb 09, 2008 9:48 am
I don't think it would filter correctly.Kevin
Sat Feb 09, 2008 1:11 pm
The correct filter element is determined by which cover/bolt is on the tractor. If all else is in proper working order, oil pressure won't be changed by which filter is used.
Tue Feb 12, 2008 12:00 am
On the W-4/H series the tall oil filter is for the early models. The '39 and '40 models maybe a little longer. I'll have to check my parts books
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.