This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

H countershaft nut

Farmall H, HV & Super H, 300 & 350, 1939-1958
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
artc
Cub Pro
Cub Pro
Posts: 1871
Joined: Sun Mar 30, 2003 10:25 am
Zip Code: 06457
eBay ID: cmtelephone
Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.

In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade.
Location: CT, Middletown
Contact:

H countershaft nut

Postby artc » Fri Oct 31, 2008 8:38 am

Anyone know how to remove the countershaft nut (which is the drive for the hydraulic pump) on an H?

is it right hand thread? is there a special tool that mimics the pump drive?

thanks, art
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org

SPONSOR AD

Sponsor



Sponsor
 

Jim Becker
Team Cub
Team Cub
Posts: 17214
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: H countershaft nut

Postby Jim Becker » Fri Oct 31, 2008 9:08 am

I think it is a right hand thread. Use a pinch bar (not a round one, obviously).

User avatar
artc
Cub Pro
Cub Pro
Posts: 1871
Joined: Sun Mar 30, 2003 10:25 am
Zip Code: 06457
eBay ID: cmtelephone
Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.

In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade.
Location: CT, Middletown
Contact:

Re: H countershaft nut

Postby artc » Fri Oct 31, 2008 3:10 pm

thanks, Jim. the service manual simply says "remove nut..." but its not a nut at all.

a piece of 18" X 4" X 1/2" thick flat stock, a pipe wrench inside on the spacer, and a hammer did the trick. :)

knowing it was not left hand thread increased my confidence to apply the pressure required to remove it. thanks.
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org


Return to “Farmall H, HV, Super H, 300 & 350”

Who is online

Users browsing this forum: No registered users and 4 guests