Wed Apr 29, 2009 9:42 am
The sterring shaft that goes through the radiator to the bolster on a 53 super h how does that come out so i can remove the radiator ive got the top half all removed but i want to get the radiator off for painting purpose,also i believe the rad is bolted in from the bottom is that correct
Wed Apr 29, 2009 9:53 am
after the universal joint is loose, remove the plate on the front of the bolster. the shaft will then screw out toward the front.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.