farmall h missing
Posted: Sun Sep 13, 2009 4:17 pm
I am having problems with my h. When its first started It runs a little rough but not too bad. Then as it warms up it starts to miss and pop out of the exhaust.
At full throttle the miss is still there but is a little but harder to hear. once warm at idle it misses, pops, and lopes. You can pull the choke out and you can get it to run fairly smooth. It seems to me to be running lean but I am no expert.
I have been working on this for a few days and I am pretty well stumped.
Now for a little backgound, I have had this tractor for about a year and it has always had a very slight miss. I bought it from a guy who said he could never get it to run right so he parked it. I think this miss is what he was talking about.
Two days ago I thought I would change the short piece of pipe coming out of the manifold with a longer one. So with a lot of heat, pounding, and a big pipe wrench I got it out. Now sense I put the new pipe and muffler that miss has gotten a lot worse.
Sense then I have cleaned the carb 3 times, checked the points 2 times, cleaned the cap and rotor, and checked the timing. I even rigged up another small tank that I know is clean.
One other thing, I can unscrew the main jet ( the one on the bottom of the carb) until it almost falls out. But it still does not seem to get to the point of running to rich. unless I use the choke
I am not sure if working on the manifold with the heat and everything may have opened up a crack or hole causing it to run lean. Or if the carb is the problem,maybe spark it has a mag on it, or possibly something else I have not thought of.
So if anyone has an idea let me know. Because I am not sure what to do next.
Thanks for any help
Zack
At full throttle the miss is still there but is a little but harder to hear. once warm at idle it misses, pops, and lopes. You can pull the choke out and you can get it to run fairly smooth. It seems to me to be running lean but I am no expert.
I have been working on this for a few days and I am pretty well stumped.
Now for a little backgound, I have had this tractor for about a year and it has always had a very slight miss. I bought it from a guy who said he could never get it to run right so he parked it. I think this miss is what he was talking about.
Two days ago I thought I would change the short piece of pipe coming out of the manifold with a longer one. So with a lot of heat, pounding, and a big pipe wrench I got it out. Now sense I put the new pipe and muffler that miss has gotten a lot worse.
Sense then I have cleaned the carb 3 times, checked the points 2 times, cleaned the cap and rotor, and checked the timing. I even rigged up another small tank that I know is clean.
One other thing, I can unscrew the main jet ( the one on the bottom of the carb) until it almost falls out. But it still does not seem to get to the point of running to rich. unless I use the choke
I am not sure if working on the manifold with the heat and everything may have opened up a crack or hole causing it to run lean. Or if the carb is the problem,maybe spark it has a mag on it, or possibly something else I have not thought of.
So if anyone has an idea let me know. Because I am not sure what to do next.
Thanks for any help
Zack