FARMALL H
Moderator: Team Cub
1 post
• Page 1 of 1
FARMALL H
by DanR » Thu Sep 16, 2010 5:49 am
Ok I got the shaft seal in with the help from John. I made a cradle thing to put the pump back in by myself. Now the problem is to put the pump in the housing and get the arm in the loop. Can't see anything in there. Also not sure if the arm is in the right position on the shaft. I sure would like to get this problem solved. Thanks, Dan
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
- DanR
- 501 Club
- Posts: 1611
- Joined: Fri Dec 22, 2006 6:28 am
- Location: Tennessee East
- Zip Code: 37743
- Circle of Safety: Y
1 post
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest
|
|