H mixture issues

Farmall H, HV & Super H, 300 & 350, 1939-1958

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

H mixture issues

Postby Bowen » Tue Mar 08, 2011 12:07 am

When setting the mixture on my '47 H, I can put the needle in to get a rough run on the lean side but after 1 1/2 turns out from seated, I can continue to turn out and it won't get too rich. It simply runs until the needle is removed completely. The packing isn't real snug.

It has a carb kit rebuild on it.

Is there a small passage in carb that has been overlooked? Is the loose needle packing affecting it? Are some of these so forgiving that over-rich doesn't change it much?

It sputters alittle at idle but runs smooth when throttled up or with any kind of load on it.
Bowen
 
Posts: 47
Joined: Mon Jan 24, 2011 11:10 pm
Location: Elkton, MD
Zip Code: 21921
Tractors Owned: .
49 Cub
47 H
39 JD B
48 Massey-Harris 22
Gravelys (gobs of 'em)
Circle of Safety Award
Circle of Safety: Y

Re: H mixture issues

Postby Eugene » Tue Mar 08, 2011 9:37 am

http://www.cleancomputes.com/Cub/Blue%2 ... System.htm

Above IH carburetors with pictures/sketches of internal plumbing/passages.

Edit: Thinking partially blocked passage in the idle system.
I have an excuse. CRS.
Eugene
Team Cub Mentor
Team Cub Mentor
 
Posts: 12877
Joined: Fri Jul 02, 2004 9:52 pm
Location: Mo. Linn
Zip Code: 65051
Circle of Safety Award
Circle of Safety: Y

Re: H mixture issues

Postby KETCHAM » Wed Mar 09, 2011 9:58 pm

Ya fix it??? Good carb kit or cheepie??? Kevin It does matter. :shock: :shock:
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
User avatar
KETCHAM
5+ Years
5+ Years
 
Posts: 5511
Joined: Thu Jul 28, 2005 2:37 pm
Location: Marshallville Ohio
Zip Code: 44645
eBay ID: kevinb2366
Tractors Owned: 47 Cub 48 Cub 50 H


Return to Farmall H, HV, Super H, 300 & 350

Who is online

Users browsing this forum: No registered users and 0 guests