Generator oil port problem 1950 Farmall H
Posted: Tue May 03, 2011 6:11 pm
So I ordered and received an operators manual for the H and decided to remove the hood and check on a few things on this "factory correct" beast.
The new paint job is not too awful bad, but they certainly didn't do a perfect job.
I started looking for lube spots and something didn't look right on the generator.
The front oil port is on the wrong side.
As a matter of fact, it's impossible to access.
It even looks like the rear port is on the wrong side also, but at least it's accessible.
So, any red guys out there who have seen this before? If so what do I do about it?
The new paint job is not too awful bad, but they certainly didn't do a perfect job.
I started looking for lube spots and something didn't look right on the generator.
The front oil port is on the wrong side.
As a matter of fact, it's impossible to access.
It even looks like the rear port is on the wrong side also, but at least it's accessible.
So, any red guys out there who have seen this before? If so what do I do about it?