Farmall H, HV & Super H, 1939-1954
Sun Oct 23, 2011 8:06 pm
I'm looking at possibly purchasing a Farmall H I think its a '42 looking at the serial #
FBH I think its a gasoline model
with wide front end, and 3 pt hitch, and front end loader
is there a service manual available?? on the forum??
what should I look for as far as common problems with that model?
how big a plow/disc would it pull??
Sun Oct 23, 2011 8:38 pm
Howard, My experience has been 2-14's like a No. 8 and a 7 or 8 ft. drag disc. H's were either gasoline or distillate, no diesels OEM. The only common problem I've seen is worn front end parts causing shimmy in road gear (I think this applies to all old tractors). As far as online manuals, I can't answer this, but I'm sure someone can. John
Sun Oct 23, 2011 8:40 pm
The H was a great tractor in it's day. It is generally considered a 2 bottom plow tractor. We pulled 2 - 14's with ours. There are tons of them out there and parts are reasonable. The wide front end and 3 point also make it desireable. I don't think Rudi has anything on the manual site for the H but there is a lot of knowledge about them on many IH forums.
Sun Oct 23, 2011 8:46 pm
Can't believe I beat Big Dog. John
Sun Oct 23, 2011 9:19 pm
TW Cook has a lot of information on his H site. It has been there a long time so a lot of the external links are out of date.http://www.farmall-h.com/
Sun Oct 23, 2011 10:11 pm
you guys are fantastic!!
thank you for the replies
would a 42 have a similar charging system to a cub ?
i.e. 6v pos ground/ or could it have been changed over to 12 V //
it does have a magneto ign on it
also are there implements made for the H
similar to a cub - sickle bar, planter/side dresser
Sun Oct 23, 2011 10:24 pm
Actually I do have a few manuals for the M-MV. Just not on the server at the moment. Looks like that other site might be pretty useful.
Sun Oct 23, 2011 10:28 pm
i answered my own question RE theimplements - on the farmall - h .com website
it seems to intrigue me . ..
but not as much as a cub!!!!
Mon Oct 24, 2011 1:05 pm
I have a 40 Model H. Fun tractor. My is narrow front. Sure would like to have a wide front!
I was able to find manuals on-line. And as John said, the biggest problem mine had was front wheel shimmy in road gear. A new gear in the steering box solved that problem.
**Edit** To correct year. Oops.
Wed Oct 26, 2011 7:56 pm
Curious what an H is worth these days. A "friend of a friend" has one, I have not gone to see it yet, but it's been outside for a while, supposedly was running 3 years ago, has tin can over muffler, engine turns over, and it has a Farmall loader to match. Being told the tires are usable, and the owner knows of no major problems. I have met the guy a few years ago and I believe he would be honest to my friend about it. Anybody can give me an idea what kind of range we're looking at ?
Thu Oct 27, 2011 2:17 pm
Without the benefit of a picture, I'm gonna say $500-$750...Call if what you will, but as it sits it's a non-running tractor. Loader would add little, if any value.
Of course...I paid twice that for a non runnin' M...wanted it real bad and it was 6 miles from the house. I figured the ol' gal had sit out long enough and I gave the man his askin' price and hauled her home a happy man.
Thu Oct 27, 2011 2:22 pm
Tractor Supply( which I don't usually recommend for anything) has the I & T Shop Manual(or can order it)
It is IH-8 , covers several letter series tractors INCLUDING the Cub(prior to 1957). Not as good as the IH Blue Ribbon Shop Manual but is adequate. just myMHO, your results may vary.
Thu Oct 27, 2011 3:31 pm
How much is an "H" worth? In this area, central Missouri, $800- to $1000- for one in field ready work condition.
If you are going to purchase a tractor, you are better off spending a few dollars more for one in running, ready to work condition.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.