Farmall Cub

Hi, i have the measurements to make a gas gauge for my Cub, and was wanting to make one for my H, would anyone happen to know off hand the measurements? thanks

http://www.farmallcub.com/phpBB2/viewtopic.php?f=1&t=65416&hilit=measuring+stick

EDIT: Oops I didn't see the "H".

1. Start with an empty tank.
2. Pour a gallon of gas in the tank.
3. Insert a blank stick.
4. Remove stick and mark the line where the wet spot on the stick meets the dry spot.
5. Add a second gallon of gas.
6. Reinsert stick.
7. Remove stick and mark the new wet/dry line.
8. Repeat the above steps until tank is full.