This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
McCormick W4
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
DelValCub
- 10+ Years
- Posts: 76
- Joined: Thu Jun 23, 2011 2:32 pm
- Zip Code: 07849
McCormick W4
Being that this tractor has the same engine as the H, I figured it was a safe bet to post here. I am looking for a good carburetor to rebuild (solid core). I went to rebuild mine and the bottom half of the venturi was broken right off. I am not sure if this is the correct place to post this, I am just trying to find one so I can keep this project going. Thanks A.J.
-
rjohnson
- 5+ Years
- Posts: 25
- Joined: Fri Feb 06, 2015 12:13 pm
- Zip Code: 45346
- Tractors Owned: 1955 Farmall Cub
1964 Farmall 806D
1950 Farmall M
1941 International A Industrial - Circle of Safety: Y
Re: McCormick W4
I would try something like eBay. Here is a link for 3, but they end soon: http://www.ebay.com/itm/3-FARMALL-H-CAR ... 4ae59e3ac3. You could buy these and sell what you don't end up using.
-
Bob McCarty
- Team Cub
- Posts: 11854
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: McCormick W4
If you can remove the broken pieces of the venturi, McDonald Carbs has these: http://www.mcdonaldcarb.com/SearchResul ... Search.y=0
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
DelValCub
- 10+ Years
- Posts: 76
- Joined: Thu Jun 23, 2011 2:32 pm
- Zip Code: 07849
Re: McCormick W4
thank you for the replies, I also saw the 3 that were up on ebay. I might watch it and make a last minuet move. Thank you also for the other link for the replacement parts. I really did not know I could "rebuild" that part of the carb. Would be nice to keep the original carb. Thanks again guys.
Return to “Farmall H, HV, Super H, 300 & 350”
Who is online
Users browsing this forum: No registered users and 3 guests
