Roll Pin on slip clutch

Farmall B & BN Tractors, 1939-1947

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Roll Pin on slip clutch

Postby jostev » Sun Aug 20, 2006 6:41 pm

I have 2 slip clutches for the tractors, one is 1 1/8"? to 1 3/8"? spline, and the other is just 1 3/8-1 3/8" and i have lost both of the roll pins for them :oops: i was just wondering if you HAVE to have a ROLL pin in there? i know that they are hollow blah blah blah so they can get grease, but local hardware stores dont' have the right sized roll pins, they are too short, but are only bout 3/4 the length of the "correct" one... but would a shorter one work? apposed to using a regular pin the right length? (no hole in middle or anything)

just want some opions from people who know before i might ruin somthing....

Thanks for any help/advice

Johnny
User avatar
jostev
Cub Pro
Cub Pro
 
Posts: 1254
Joined: Wed Aug 31, 2005 5:10 pm
Location: NH, Bethlehem
Zip Code: 03574
eBay ID: farmallkid48
Skype Name: farmall_kid
Tractors Owned: 41 B
48 H
49 C
50 red demo Cub
51 C
52 Cub
54 Super C
61 and 63 Cub Cadet Originals
78 Cub Cadet 1450

Postby Bigdog » Sun Aug 20, 2006 7:23 pm

Johnny - Try a TSC store or Cub Cadet / lawn and garden equipment store. Roll pins are typically hardened and are there for a purpose.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

http://www.cubtug.com
User avatar
Bigdog
Team Cub
Team Cub
 
Posts: 23820
Joined: Sun Feb 02, 2003 12:50 pm
Location: OH, Stoutsville
Zip Code: 43154
Circle of Safety Award
Circle of Safety: Y

Postby jostev » Sun Aug 20, 2006 7:28 pm

i don't have a TSC place anywhere near me, and the cc dealer is a long ways away :cry: i know there is a reason for them, but would a pin work :?: or a shorter roll pin :?: i know that they hold it on the pto shaft too....

Thanks

Johnny
User avatar
jostev
Cub Pro
Cub Pro
 
Posts: 1254
Joined: Wed Aug 31, 2005 5:10 pm
Location: NH, Bethlehem
Zip Code: 03574
eBay ID: farmallkid48
Skype Name: farmall_kid
Tractors Owned: 41 B
48 H
49 C
50 red demo Cub
51 C
52 Cub
54 Super C
61 and 63 Cub Cadet Originals
78 Cub Cadet 1450

Postby Don McCombs » Sun Aug 20, 2006 7:29 pm

Johnny,

What size roll pin do you need?
Don McCombs
MD, Deep Creek Lake

"1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
 
Posts: 10693
Joined: Mon Feb 03, 2003 6:45 am
Location: MD, Deep Creek Lake
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
Circle of Safety Award
Circle of Safety: Y

Postby Bigdog » Sun Aug 20, 2006 7:35 pm

If the roll pin is longer than the shaft diameter and is centered it should work at least temporarily. I'd call Ken at Carter & Gruenewald and order some.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

http://www.cubtug.com
User avatar
Bigdog
Team Cub
Team Cub
 
Posts: 23820
Joined: Sun Feb 02, 2003 12:50 pm
Location: OH, Stoutsville
Zip Code: 43154
Circle of Safety Award
Circle of Safety: Y

Postby jostev » Sun Aug 20, 2006 8:02 pm

i don't nkow what size i need Don, i will check tomorrow, i think for now i wil just buy a shorter one, it's a bit longer than the shaft diameter, but not from one grease fittin to the other... i will call Ken in a few days, cause i NEED to cut like 20 acres in the next few days...

Thanks

Johnny
User avatar
jostev
Cub Pro
Cub Pro
 
Posts: 1254
Joined: Wed Aug 31, 2005 5:10 pm
Location: NH, Bethlehem
Zip Code: 03574
eBay ID: farmallkid48
Skype Name: farmall_kid
Tractors Owned: 41 B
48 H
49 C
50 red demo Cub
51 C
52 Cub
54 Super C
61 and 63 Cub Cadet Originals
78 Cub Cadet 1450

Postby jostev » Sun Aug 20, 2006 8:10 pm

i keep forgetting to mention, it's on the B with a JD #5 sickle, so it's not a HUGE tractor with alot of HP :lol:

Johnny
User avatar
jostev
Cub Pro
Cub Pro
 
Posts: 1254
Joined: Wed Aug 31, 2005 5:10 pm
Location: NH, Bethlehem
Zip Code: 03574
eBay ID: farmallkid48
Skype Name: farmall_kid
Tractors Owned: 41 B
48 H
49 C
50 red demo Cub
51 C
52 Cub
54 Super C
61 and 63 Cub Cadet Originals
78 Cub Cadet 1450


Return to Farmall B & BN

Who is online

Users browsing this forum: No registered users and 0 guests