Page 1 of 1
M Distributer question
Posted: Sat Mar 25, 2006 10:58 pm
by JBall8019
Hi,
There is a slotted screw under the distributor cap. would this be a point to add oil? I was wondering becasue the distibutor sounds alot louder than my cubs' distributor.
Thanks
john
Posted: Sat Mar 25, 2006 11:28 pm
by Eugene
Posted: Sun Mar 26, 2006 9:01 am
by JBall8019
Thanks!
I think i have some zerks in the barn. Will just a few pumps from my grease gun work? also i have been putting oil in my cubs distributor, will that cause any dammage?
John
Posted: Sun Mar 26, 2006 1:46 pm
by beaconlight
No just don't over do it.
bill
Posted: Sun Mar 26, 2006 6:42 pm
by JBall8019
hey guys i need some advice. i put a zerk into the hole wehre the plug was but i could only get onle pump of my grease gun in the hole. i looked in the hole after and it still could use more grease. is there some other way of getting grease in there?
thanks
John
Posted: Sun Mar 26, 2006 6:49 pm
by George Willer
Use a zerk that isn't plugged.
Posted: Mon Mar 27, 2006 3:52 pm
by JBall8019
lol!!! i already checked that zerk to see if it was working properly and it was. i think i will try again but making sure the zerk isnt snug in the hole so air can escape.
John