Farmall M, Super M, 400, 450 & 560 Tractors, 1939-1963
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Thu Jul 02, 2009 12:39 pm
1944 M head high compression. My question is
The exhaust valves have a roto cap, Intake are stamped caps
When I removed the old springs the intake had an extra coil longer on the spring
Bates Corp. sent 8 springs the length of the exhaust valves only. Thy have been checking but have not got an answer yet.
Any Ideas where I can get the longer springs
Fri Jul 03, 2009 6:38 am
Phil, if you can't come up with the longer springs, you could put rotors on the intake as well. (if you can find those)
Sat Jul 04, 2009 9:29 am
I can get them They are $16 bucks each.
I may have to go that route though.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.