1944 M head high compression. My question is
The exhaust valves have a roto cap, Intake are stamped caps
When I removed the old springs the intake had an extra coil longer on the spring
Bates Corp. sent 8 springs the length of the exhaust valves only. Thy have been checking but have not got an answer yet.
Any Ideas where I can get the longer springs
Phil
Valve springs for a M
Moderator: Team Cub
3 posts
• Page 1 of 1
Valve springs for a M
by Phillip W. Lenke » Thu Jul 02, 2009 12:39 pm
"Work Hard ,Play Often,Care Always"
- Phillip W. Lenke
- 501 Club
- Posts: 1474
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
Re: Valve springs for a M
by Gary Dotson » Fri Jul 03, 2009 6:38 am
Phil, if you can't come up with the longer springs, you could put rotors on the intake as well. (if you can find those)
- Gary Dotson
- Cub Pro
- Posts: 2319
- Joined: Thu Aug 03, 2006 6:20 am
- Location: OH West Mansfield
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D 
- Circle of Safety: Y
Re: Valve springs for a M
by Phillip W. Lenke » Sat Jul 04, 2009 9:29 am
I can get them They are $16 bucks each.
used.
I may have to go that route though.
Phil
used.
I may have to go that route though.
Phil
"Work Hard ,Play Often,Care Always"
- Phillip W. Lenke
- 501 Club
- Posts: 1474
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
3 posts
• Page 1 of 1
Return to Farmall M, Super M, 400, 450, & 560
Who is online
Users browsing this forum: No registered users and 1 guest
|
|