This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Farmall M Loader Plumbing

Farmall M, Super M, 400, 450 & 560 Tractors, 1939-1963
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
JBall8019
10+ Years
10+ Years
Posts: 418
Joined: Sat Jan 17, 2004 6:40 pm
Location: Lordstown, Ohio

Farmall M Loader Plumbing

Postby JBall8019 » Tue Mar 16, 2010 12:32 pm

Anyone here have a loader on thier M or H? I am in the middle of installing one on my M and I lost the directions and notes on how to install it. I basically need a picture of how the cylinders and lever is plumbed to the ports on the left or starter side of the tractor. I have had a fun time actually installing the loader so far when I got enough spare time. Its a one way hydraulic loader with manual trip manure bucket, i think its a new idea loader.
thanks
john

SPONSOR AD

Sponsor



Sponsor
 

User avatar
Dusti Snider
10+ Years
10+ Years
Posts: 601
Joined: Tue Feb 04, 2003 9:10 am
Zip Code: 24739
Tractors Owned: 1951 Farmall "M" - Restored
1949 Farmall Cub - Original "Blue Ribbon Reconditioned"
1953 Farmall Super AI
1934 Farmall F-12
1929 Farmall Regular
1956 Ford 640
1972 Ford 4000
Circle of Safety: Y
Location: Mercer County, West Virginia

Re: Farmall M Loader Plumbing

Postby Dusti Snider » Wed Mar 17, 2010 3:54 pm

Can't say that I've actually done it or seen it done, but from what I know about the lift-all is both the front right and left ports operate at the same time. The left rear port is the delayed lift for operating the rear gang cultivators. Your loader cylinders would have to be piped to the front ports and the return would have to return back to the pump through a close coupled tee just below the lift-all fill cap.

Hopefully this information will help some...

Image

Image

Image

Image
Image

Member IHCC Chapter 37 & 42 - North Carolina

User avatar
John *.?-!.* cub owner
Cub Pro
Cub Pro
Posts: 23701
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: Farmall M Loader Plumbing

Postby John *.?-!.* cub owner » Wed Mar 17, 2010 9:22 pm

if it is a model 30 or 31, or similar this should cover it. I do not think you need the return lines shown on an M, only an H. If they are on loader though, the top of cylinders are probably full of oil.

http://home.centurytel.net/ejpuckett/Ma ... %20loader/
If you are not part of the solution,
you are part of the problem!!!

JBall8019
10+ Years
10+ Years
Posts: 418
Joined: Sat Jan 17, 2004 6:40 pm
Location: Lordstown, Ohio

Re: Farmall M Loader Plumbing

Postby JBall8019 » Mon Apr 19, 2010 7:19 pm

thanks guys,
i think i figured it out from looking at the pictures and should have it working in a few weeks. i need to learn how post pictures after being a member of this site for six years.
john


Return to “Farmall M, Super M, 400, 450, & 560”

Who is online

Users browsing this forum: No registered users and 3 guests