M

Farmall M, Super M, 400, 450 & 560 Tractors, 1939-1963

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

M

Postby DanR » Mon Nov 29, 2010 8:45 am

Does anyone have a picture of the radiator shutter linkage on an M? Thanks
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
DanR
5+ Years
5+ Years
 
Posts: 1631
Joined: Fri Dec 22, 2006 6:28 am
Location: Tennessee East
Zip Code: 37743
Circle of Safety Award
Circle of Safety: Y

Re: M

Postby Mr E » Mon Nov 29, 2010 10:35 am

DanR wrote:Does anyone have a picture of the radiator shutter linkage on an M? Thanks


Dan, I have an H with shutters. Do you know if the linkage is similar? If so, I'll be happy to get you some pictures of that.
In the middle of every difficulty lies opportunity. - Albert Einstein


Roy Edenfield
Deep South CubFest
February 13 & 14, 2015
User avatar
Mr E
5+ Years
5+ Years
 
Posts: 5427
Joined: Mon Jul 30, 2007 11:48 am
Location: FL, Sneads
Zip Code: 32460
eBay ID: noles1432460
Circle of Safety Award
Circle of Safety: Y

Re: M

Postby dirtyred » Mon Nov 29, 2010 7:20 pm

which end do you need a pic of?
He that tilleth his land shall be satisfied with bread: Proverbs 12:11
User avatar
dirtyred
5+ Years
5+ Years
 
Posts: 1394
Joined: Sun Aug 02, 2009 11:52 am
Location: statenville ga
Zip Code: 31648
Tractors Owned: 1949 farmall cub (tinkerbell) 1949 allis chalmers(ole bess) 1949-50 ?john deere model a

Re: M

Postby DanR » Tue Nov 30, 2010 8:02 am

I think I have it figured out. Problem was every piece is bent, broken, or modified. This application is not typical IH. Things like cotter pins backwards and moving the water pump because one piece is 1/8" too long. Must have been engineered by someone from the other side.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
DanR
5+ Years
5+ Years
 
Posts: 1631
Joined: Fri Dec 22, 2006 6:28 am
Location: Tennessee East
Zip Code: 37743
Circle of Safety Award
Circle of Safety: Y

Re: M

Postby Phillip W. Lenke » Wed Dec 01, 2010 9:15 am

Dan
I have a shutter stystem on our M.
Let me know what you need,
Phil
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
5+ Years
5+ Years
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Re: M

Postby DanR » Wed Dec 01, 2010 9:29 am

Thanks Phil, I'm going to make a new long rod today. The old one has too many bends to be straightened properly. I'll know better after I get that in.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
DanR
5+ Years
5+ Years
 
Posts: 1631
Joined: Fri Dec 22, 2006 6:28 am
Location: Tennessee East
Zip Code: 37743
Circle of Safety Award
Circle of Safety: Y

Re: M

Postby Phillip W. Lenke » Wed Dec 01, 2010 10:57 am

Just a heads up it has a drop of 3 inches and an offset of 1 inch.
5/16 rod
The travel for the threads is 3/4 inch to open and shut the shutters.
Things i have found to make the new offset rod that attaches to the crank
Phil
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
5+ Years
5+ Years
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Re: M

Postby DanR » Thu Dec 02, 2010 7:43 am

Yikes! Glad I found out before I did anything.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
DanR
5+ Years
5+ Years
 
Posts: 1631
Joined: Fri Dec 22, 2006 6:28 am
Location: Tennessee East
Zip Code: 37743
Circle of Safety Award
Circle of Safety: Y


Return to Farmall M, Super M, 400, 450, & 560

Who is online

Users browsing this forum: No registered users and 0 guests