Farmall M, Super M, 400, 450 & 560 Tractors, 1939-1963
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Mon Nov 29, 2010 8:45 am
Does anyone have a picture of the radiator shutter linkage on an M? Thanks
Mon Nov 29, 2010 10:35 am
DanR wrote:Does anyone have a picture of the radiator shutter linkage on an M? Thanks
Dan, I have an H with shutters. Do you know if the linkage is similar? If so, I'll be happy to get you some pictures of that.
Mon Nov 29, 2010 7:20 pm
which end do you need a pic of?
Tue Nov 30, 2010 8:02 am
I think I have it figured out. Problem was every piece is bent, broken, or modified. This application is not typical IH. Things like cotter pins backwards and moving the water pump because one piece is 1/8" too long. Must have been engineered by someone from the other side.
Wed Dec 01, 2010 9:15 am
I have a shutter stystem on our M.
Let me know what you need,
Wed Dec 01, 2010 9:29 am
Thanks Phil, I'm going to make a new long rod today. The old one has too many bends to be straightened properly. I'll know better after I get that in.
Wed Dec 01, 2010 10:57 am
Just a heads up it has a drop of 3 inches and an offset of 1 inch.
The travel for the threads is 3/4 inch to open and shut the shutters.
Things i have found to make the new offset rod that attaches to the crank
Thu Dec 02, 2010 7:43 am
Yikes! Glad I found out before I did anything.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.