Farmall M, Super M, 400, 450 & 560 Tractors, 1939-1963
Sun Mar 06, 2011 8:21 pm
What is the correct thickness for the swinging drawbar on a M/MD? Is it 3/4' or 1". The one that is on our 1951 Farmall MD is 3/4". It is all welded & buggered up so I am looking for a better one. The swivel/mounting point for it looks like it would accept a 1" bar. Thanks.
Mon Mar 07, 2011 7:24 am
1" is correct. The 3/4" is probably from an H.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.