MD head torque sequence.

Farmall M, Super M, 400, 450 & 560 Tractors, 1939-1963

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Jeff D. N.E. Wis.
10+ Years
10+ Years
Posts: 255
Joined: Mon Feb 03, 2003 2:00 pm
Zip Code: 54235
Circle of Safety: Y
Location: WI Sturgeon Bay

MD head torque sequence.

Postby Jeff D. N.E. Wis. » Sat Jul 02, 2011 1:12 pm

Does anyone have the head bolt torque sequence for a Farmall MD? I looked all through the service and operators manuals but it is not listed anywhere.

It gives the torque spec as 110 ft. lbs. but that is it.

Or do I just start in the middle and work out in a circular pattern in multiple steps?

Thanks in advance for any help.

49 Farmall Cub, 68 I-H Cub LoBoy
53 Farmall Super-A, 44 Farmall B
52 Farmall Super-C, 41 Farmall H
40 Farmall M, 46 Farmall M
51 Farmall MD, 54 Case 500 Diesel
71 Allis-Chalmers 160 Diesel

Phillip W. Lenke
10+ Years
10+ Years
Posts: 1484
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Re: MD head torque sequence.

Postby Phillip W. Lenke » Wed Jul 06, 2011 8:49 pm

Start in th middle and work out , i set the torque at 30 torque all the keep going up that way you keep thepressure constant alll over going up 20 to 30 each passtoo reach the specified torque.
hope this helps
"Work Hard ,Play Often,Care Always"

Return to “Farmall M, Super M, 400, 450, & 560”

Who is online

Users browsing this forum: No registered users and 0 guests