sleeve hitch

IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
1956farmallcub/tripod
Posts: 27
Joined: Fri Nov 04, 2016 12:00 pm
Zip Code: 49270
Tractors Owned: 1956 farmall cub (tripod)
1950 farmall m (mighty red)
1951 farmall c ( rusty )
1955 oliver super 88 diesel
1954 allis chalmers wd45
1949 garden master garden tractor
1969 john deere 140 h1
1970 massey ferguson 7
1972 sears custom 8
1972 sears custom 10xl
1975 cub cadet 1000
1983 john deere 216
1986 john deere 165 hydro

sleeve hitch

Postby 1956farmallcub/tripod » Thu Jan 12, 2017 8:29 am

will a rear lift from a 77 1650 fit on my 69 127 :help:

TWheat
5+ Years
5+ Years
Posts: 128
Joined: Fri Sep 02, 2011 6:22 pm
Zip Code: 33876

Re: sleeve hitch

Postby TWheat » Fri Jan 13, 2017 6:31 am

From what I can tell from my pictures, IFF both are hydraulic lift OR both are hand lift, they should exchange. the connections between hydraulic lift and hand lift are different.

User avatar
RanchsA
Cub Star
Cub Star
Posts: 126
Joined: Wed Feb 11, 2015 10:38 am
Zip Code: 48873
Tractors Owned: 1946 Farmall A
1967 Cub Cadet 123
1968 Cub Cadet 125
1973 Cub Cadet 108
2014 Cub Cadet GT2042
Location: Mid Michigan

Re: sleeve hitch

Postby RanchsA » Fri Jan 13, 2017 9:42 am

I think the bar that attaches the lift to the rock shaft differs between a wide and narrow frame. Looks like the wide frame has a little bend at the end vs straight for the narrow frame. I grabbed these off a cub cadet parts page. I know the one I installed on my 108 had the bend. I'll climb under the 125 today and verify if it is straight. Both of mine are hand lifts.
Attachments
IMG_0083.JPG
Narrow frame
IMG_0084.JPG
Wide frame

User avatar
dgrapes59
5+ Years
5+ Years
Posts: 3254
Joined: Sun Jul 13, 2008 10:05 pm
Zip Code: 45067
Tractors Owned: 1951 Cub
2-1955 Loboy w FH
a few plows, discs, mowers, blades, carrier & such
Several '61 CC Originals, CC Narrow Frames- 70 & 100's, 71, Couple 102's & 122's, 72, 124, 73, various CC options & implements #1 & 2 Trailers, 1963 Springfield, JD 770
Circle of Safety: Y
Location: OH, Trenton

Re: sleeve hitch

Postby dgrapes59 » Fri Jan 13, 2017 10:37 am

As noted, they are different, if you are talking about the "3 Point Hitch" (the lower bracket is the same). The Brinly Sleeve Hitch adaptors would be the same (what attaches to the 3-point hitch).

Good luck,
David

User avatar
gitractorman
10+ Years
10+ Years
Posts: 2520
Joined: Mon Oct 24, 2005 11:35 am
Zip Code: 14072
eBay ID: toysforjake
Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel
Circle of Safety: Y
Location: Grand Island, NY

Re: sleeve hitch

Postby gitractorman » Sun Jan 15, 2017 8:04 am

No, they are not interchangeable. The 1650 is a wide frame tractor and the rear rockshaft is very much different than what goes on a narrow frame tractor like the 127.
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller

jim turner
10+ Years
10+ Years
Posts: 1660
Joined: Sun Feb 02, 2003 1:09 pm
Zip Code: 64784
Circle of Safety: Y
Location: Mo, Sheldon

Re: sleeve hitch

Postby jim turner » Thu Apr 20, 2017 8:17 am

could someone tell me what the little square block with 2 bolt holes and a stud is for, I'm new to this type of tractor.
Jim Turner

User avatar
RanchsA
Cub Star
Cub Star
Posts: 126
Joined: Wed Feb 11, 2015 10:38 am
Zip Code: 48873
Tractors Owned: 1946 Farmall A
1967 Cub Cadet 123
1968 Cub Cadet 125
1973 Cub Cadet 108
2014 Cub Cadet GT2042
Location: Mid Michigan

Re: sleeve hitch

Postby RanchsA » Thu Apr 20, 2017 4:04 pm

Yep. It bolts on to the lift handle assembly and then the lift bar clips on to it. This pushes or pulls the rocker on the lift. Hope this makes sense here is a pic of the parts from manual.
Attachments
Capture.JPG

jim turner
10+ Years
10+ Years
Posts: 1660
Joined: Sun Feb 02, 2003 1:09 pm
Zip Code: 64784
Circle of Safety: Y
Location: Mo, Sheldon

Re: sleeve hitch

Postby jim turner » Fri Apr 21, 2017 9:05 am

Thanks, mine is hyd so that explains it.
Jim Turner

User avatar
gitractorman
10+ Years
10+ Years
Posts: 2520
Joined: Mon Oct 24, 2005 11:35 am
Zip Code: 14072
eBay ID: toysforjake
Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel
Circle of Safety: Y
Location: Grand Island, NY

Re: sleeve hitch

Postby gitractorman » Tue Apr 25, 2017 12:27 pm

That part (part #7 above) is used on either a manual lift or a hydraulic lift. It attaches the rear rockshaft to the primary rockshaft, and bolts in the same place, regardless of a hand lift or hydraulic lift.
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller


Return to “Cub Cadet”

Who is online

Users browsing this forum: No registered users and 2 guests