Artie is underway! (Pics Added 1-2...6-7)

IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Larry G
10+ Years
10+ Years
Posts: 618
Joined: Mon Oct 01, 2007 4:53 pm
Zip Code: 46163
Tractors Owned: 1957 Farmall Cub
1963 Farmall Cub
193 Plow
54A Blade
Circle of Safety: Y
Location: IN, New Palestine

Re: Artie is underway! (Pics Added 1-2...6-7)

Postby Larry G » Thu Sep 08, 2011 8:01 am

Looking good :D :D :D :D

Larry

User avatar
dgrapes59
5+ Years
5+ Years
Posts: 3255
Joined: Sun Jul 13, 2008 10:05 pm
Zip Code: 45067
Tractors Owned: 1951 Cub
2-1955 Loboy w FH
a few plows, discs, mowers, blades, carrier & such
Several '61 CC Originals, CC Narrow Frames- 70 & 100's, 71, Couple 102's & 122's, 72, 124, 73, various CC options & implements #1 & 2 Trailers, 1963 Springfield, JD 770
Circle of Safety: Y
Location: OH, Trenton

Re: Artie is underway! (Pics Added 1-2...6-7)

Postby dgrapes59 » Thu Sep 08, 2011 9:32 pm

Jim,

It is looking real good!

Thanks for the updates, this is an interesting project to follow,
David

Dswietlisbach
Posts: 1
Joined: Wed Dec 06, 2017 5:44 pm
Zip Code: 47240

Re: Artie is underway! (Pics Added 1-2...6-7)

Postby Dswietlisbach » Wed Dec 06, 2017 5:49 pm

Hi I was recently thinking about your articulating design, in cases of high push from front end to rear end or rear end to front end do you know if it would try to raise one tire of the ground or cause one tire to slip more easily due to less down force on that particular tire?

User avatar
Stanton
Team Cub Mentor
Team Cub Mentor
Posts: 4274
Joined: Mon Jun 22, 2009 6:56 am
Zip Code: 64070
Tractors Owned: 1942 Farmall AV, serial #87025
1945 Farmall H, serial #213,651
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066
Circle of Safety: Y
Location: Lone Jack, MO

Re: Artie is underway! (Pics Added 1-2...6-7)

Postby Stanton » Thu Dec 07, 2017 1:01 pm

Dswietlisbach wrote:Hi I was recently thinking about your articulating design, in cases of high push from front end to rear end or rear end to front end do you know if it would try to raise one tire of the ground or cause one tire to slip more easily due to less down force on that particular tire?


Dswietlisbach, first of all, welcome to the forum. Secondly, you're commenting on a thread that was started over (6) years ago and JimT hasn't logged on here since June. Your question sounds reasonable, but I don't know how long it will be until he answers it.

Again, welcome.
Stanton
Image Circle of Safety

BigBill
10+ Years
10+ Years
Posts: 6196
Joined: Sat Jul 22, 2006 5:02 pm
Zip Code: 00000
Location: in northern usa

Re: Artie is underway! (Pics Added 1-2...6-7)

Postby BigBill » Thu Dec 07, 2017 4:33 pm

I think it’s allowed to swivel between both sections too besides being articulated. I think by locking the differentials and having full four wheel drive is the was to go. Even if the spider gears were loaded with spring wave washers somehow unless we weld the gears to the carrier.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.


  • Similar Topics
    Replies
    Views
    Last post

Return to “Cub Cadet”

Who is online

Users browsing this forum: No registered users and 2 guests