This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
This made my day
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 145
- Joined: Mon Jan 02, 2006 2:52 am
- Location: SW PA... US
This made my day
I had removed the linkage between the SR lever and the hydro today in order to break the rust seal that had formed on the SR lever side and fix my hydro creep problem. However... after heating and nearly having the ball joint off the threaded part of the rod twisted clean off. I searched all night for a new ball joint but nobody stocks on, not to mention i can't make a new rod out of a piece of all-thread due to the fine threads on the ball joint. Bah, what fun.
In IH Cub Cadet I trust....
- wdeturck
- 10+ Years
- Posts: 949
- Joined: Mon Dec 08, 2003 6:15 am
- Location: PA Oakmont 15139
Threaded rod
You can get threaded rod in 36" kengths fron 1/4-28 on up at http://www.mcmaster.com/
The Geezer from IHregistry.com which crashed and is now Cub Cadet Collectors.
Who is online
Users browsing this forum: No registered users and 3 guests