This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Wiring diagram??
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 34
- Joined: Tue Sep 27, 2005 1:34 pm
- Location: Tupelo, MS
Wiring diagram??
I need a wiring diagram for a CC 126. Can anyone point me in the right direction or provide a link?
-
- Team Cub Mentor
- Posts: 20370
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
IH Cub Cadet Resources at the start of this column. If that doesn't work.
http://ihregistry.com/odfaq/index.php?p ... t&cat=5#a7
Eugene
http://ihregistry.com/odfaq/index.php?p ... t&cat=5#a7
Eugene
-
- Team Cub Mentor
- Posts: 20370
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Print out the wiring diagrams for a couple of different models. Then compare the diagrams. Most are very similiar. Once familiar with the wiring diagrams compare them to your tractor.
I don't own a CC 126, but I suspect the wiring diagram for the one of the higher numbered CCs will be identical.
Eugene
I don't own a CC 126, but I suspect the wiring diagram for the one of the higher numbered CCs will be identical.
Eugene
- R Bedell
- 10+ Years
- Posts: 106
- Joined: Wed Jul 28, 2004 8:31 pm
- Zip Code: 48701
- Location: Michigan
- Contact:
-
- 10+ Years
- Posts: 2338
- Joined: Sat Apr 10, 2004 6:12 pm
- Zip Code: 40218
- Circle of Safety: Y
- Location: KY, Louisville
The 72-125 diagram that comes up on the link Eugene posted, will work. It is drawn slightly different than the 126 diagram in the service manual, but all wire colors and connections are the same. The 126 diagram shows a violet wire in the harness that is not connected to anything, but that is for the head and tail lights. Those packages will plug into that violet wire. If your 126 does not have a charge indicator (amp meter) the three wires that would be connected to it are just connected to a junction block. Your 126 may also have an extra wire (dark blue) with a female plug on the end of it, coming off the IGN. terminal of the ignition/start switch. That it the power feed for an electric lift.
- R Bedell
- 10+ Years
- Posts: 106
- Joined: Wed Jul 28, 2004 8:31 pm
- Zip Code: 48701
- Location: Michigan
- Contact:
Who is online
Users browsing this forum: No registered users and 7 guests