This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

CCO Crepper Gear

IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Scott
10+ Years
10+ Years
Posts: 1194
Joined: Sun Dec 26, 2004 7:09 pm
Zip Code: 02769
eBay ID: scottdarowski
Tractors Owned: 48 Cub
55 Cub
62 CCO
63 CCO
70 JD 112
Location: MA, Rehoboth
Contact:

CCO Crepper Gear

Postby Scott » Tue Jul 18, 2006 4:41 pm

Is there any kind of manual for this creeper?

Thanks
Image On To Bigger Things

SPONSOR AD

Sponsor



Sponsor
 

User avatar
Findoggy
10+ Years
10+ Years
Posts: 310
Joined: Sun Nov 30, 2003 4:49 pm
Location: Lehighton, PA

Postby Findoggy » Tue Jul 18, 2006 7:51 pm


User avatar
wdeturck
10+ Years
10+ Years
Posts: 949
Joined: Mon Dec 08, 2003 6:15 am
Location: PA Oakmont 15139

Postby wdeturck » Tue Jul 18, 2006 7:57 pm

Scotty D.: There is an Installing Instructions & parts list. I have the Manual and also have it on files I can E-mail you. It is 6 pages and prints out to full size. E-mail me at wdeturck@verizon.net and I will send it to you. It will be a large file.
The Geezer from IHregistry.com which crashed and is now Cub Cadet Collectors.

User avatar
Scott
10+ Years
10+ Years
Posts: 1194
Joined: Sun Dec 26, 2004 7:09 pm
Zip Code: 02769
eBay ID: scottdarowski
Tractors Owned: 48 Cub
55 Cub
62 CCO
63 CCO
70 JD 112
Location: MA, Rehoboth
Contact:

Postby Scott » Tue Jul 18, 2006 8:01 pm

Thanks guys but i had already found it before i read this.

You Have a great site wdeturck very nice
Image On To Bigger Things

User avatar
wdeturck
10+ Years
10+ Years
Posts: 949
Joined: Mon Dec 08, 2003 6:15 am
Location: PA Oakmont 15139

Postby wdeturck » Tue Jul 18, 2006 9:09 pm

I did scare myself when I went to look at my Original copy. I couldn't find page 3 & 4 and I thought I lost it. I was looking through my books to see if I misplaced it :oops: . It is a 3 page folder and I didn't realize the missing pages were folded in. I printed the missing page :roll: .
The Geezer from IHregistry.com which crashed and is now Cub Cadet Collectors.

User avatar
Scott
10+ Years
10+ Years
Posts: 1194
Joined: Sun Dec 26, 2004 7:09 pm
Zip Code: 02769
eBay ID: scottdarowski
Tractors Owned: 48 Cub
55 Cub
62 CCO
63 CCO
70 JD 112
Location: MA, Rehoboth
Contact:

Postby Scott » Wed Jul 19, 2006 8:32 pm

I was reading the manual and it said that you had to cut a hole in the frame for the lever. both my cadets and my other frames all have holes for it. Was this only in early ones?
Image On To Bigger Things

Paul B
10+ Years
10+ Years
Posts: 2338
Joined: Sat Apr 10, 2004 6:12 pm
Zip Code: 40218
Circle of Safety: Y
Location: KY, Louisville

Postby Paul B » Wed Jul 19, 2006 10:48 pm

Scotty
Yes, the early Originals did not have a hole in the frame for the creeper handle The directions for where to drill the hole, in frames without one, are a little off I believe, and the hole has to be enlarged or elongated to make it work. I don't think anyone has come up with a serial number break as to when the factory started punching the holes in the frames..

User avatar
wdeturck
10+ Years
10+ Years
Posts: 949
Joined: Mon Dec 08, 2003 6:15 am
Location: PA Oakmont 15139

Postby wdeturck » Thu Jul 20, 2006 2:09 pm

I used the dimensions given in the manual and I noted that the hole should move an 1/8" forward to be centered perfectly. I only saw one other Original with a round !" hole and that was at RPRU on the Original with the chrome air filter and eagle painted on the hood. He didn't have the rubber grommet which I do have in mine. I have a steel 3/8" rod on my creeper and when I'm in low it presses hard on the grommet. I think the earliest I found are May of 62 for the creeper slot. I didn't get enough response to get an accurate time when the creeper slot went in. I have seen a lot of butchered holes :roll: . I still have the 1" hole saw for the hole if you want to borrow it.
The Geezer from IHregistry.com which crashed and is now Cub Cadet Collectors.

User avatar
Scott
10+ Years
10+ Years
Posts: 1194
Joined: Sun Dec 26, 2004 7:09 pm
Zip Code: 02769
eBay ID: scottdarowski
Tractors Owned: 48 Cub
55 Cub
62 CCO
63 CCO
70 JD 112
Location: MA, Rehoboth
Contact:

Postby Scott » Thu Jul 20, 2006 5:11 pm

Thanks but mines already got the hole
Image On To Bigger Things

User avatar
Scott
10+ Years
10+ Years
Posts: 1194
Joined: Sun Dec 26, 2004 7:09 pm
Zip Code: 02769
eBay ID: scottdarowski
Tractors Owned: 48 Cub
55 Cub
62 CCO
63 CCO
70 JD 112
Location: MA, Rehoboth
Contact:

Postby Scott » Fri Jul 21, 2006 9:20 pm

would one of these be the correct decal http://ccspecialties.org/pics/creeperdecallarge.jpg
Image On To Bigger Things

Paul B
10+ Years
10+ Years
Posts: 2338
Joined: Sat Apr 10, 2004 6:12 pm
Zip Code: 40218
Circle of Safety: Y
Location: KY, Louisville

Postby Paul B » Fri Jul 21, 2006 10:49 pm

The Original, and 70/100 did not have/use a Creeper decal, although some people use them because the want them. I have a 100 with a creeper decal that I put on before I discovered it shouldn't be there, and I just never removed it.


Return to “Cub Cadet”

Who is online

Users browsing this forum: No registered users and 10 guests