My son was mowing the other day and all of the bolts holding the engine to the frame came out!
It has a Kohler 12.5 hp command engine - CV12.5S
can anyone tell me what size bolts I need?
Thanks
Dave
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
1320 hydro - engine mount
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 377
- Joined: Tue Sep 30, 2003 7:52 pm
- Zip Code: 23047
- Location: Doswell, Virginia
- Contact:
- wdeturck
- 10+ Years
- Posts: 949
- Joined: Mon Dec 08, 2003 6:15 am
- Location: PA Oakmont 15139
The arts book don't show them but I think it's the 4 listed with the block that are:
Screw, hex Cap, M8 x 1.25 x 35 mm lg. if only three are required the they are 25 mm lg.
Screw, hex Cap, M8 x 1.25 x 35 mm lg. if only three are required the they are 25 mm lg.
The Geezer from IHregistry.com which crashed and is now Cub Cadet Collectors.
-
- 10+ Years
- Posts: 377
- Joined: Tue Sep 30, 2003 7:52 pm
- Zip Code: 23047
- Location: Doswell, Virginia
- Contact:
- wdeturck
- 10+ Years
- Posts: 949
- Joined: Mon Dec 08, 2003 6:15 am
- Location: PA Oakmont 15139
I owned a 1320 lawn tractor and wasn't aware of it. I have the parts book and thats why I found the information.
The Geezer from IHregistry.com which crashed and is now Cub Cadet Collectors.
Who is online
Users browsing this forum: No registered users and 9 guests