Thu Oct 07, 2004 11:51 am
I am helping my brother in law with his cadet, it is stuck in gear, how do you get access to the transmission.
I need to remove the transmission shifter to see what the problem is.
Thu Oct 07, 2004 6:35 pm
You need to split the tractor. Disconnect the drive shaft, remove the seat mount that bolts to the frame rails, remove the 3 bolts on each side that bolt the transaxle to the frame, and roll it out (with some effort). Then you can get the top plate off. This is a simplified set of instructions, but I would recommend you get the manuals for the model. They can be had from Cub Cadet dealers or from Binder Books, http://www.binderbooks.com
Thu Oct 07, 2004 6:51 pm
Thanks for the reply, I would get the manual for sure if the cadet was mine.
I think the clutch is stuck also, it looks like the shift fork may have been bent or broke when he tried to change gears w/o it disengaging.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.