I just pulled in a cub cadet 107 (no head lights on this model) with wiring issues. All the wire running to voltage reg was fryed so I am tracing wires to see where they come from and where they go. The key switch has a broke ground contact so I pulled the plug and made a jumper and got it running.
A)Should field on reg show votlage when running?
B)The bat. on reg should be Hot and it is not. correct?
C) will not idle. I think carb need good cleaning?
D) When running at high speed it does not run smooth RPM seems to be flotting up and down could this be govener spring setting?
Any help thanks Oldiron29
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
107 wiring ?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
oldiron29
- 10+ Years
- Posts: 109
- Joined: Wed Feb 20, 2008 6:46 am
- Location: Miller Place, NY
107 wiring ?
RED IS GOOD! BUT GRAY IS GREAT!!
'49 cub/1000 loader '50 cub/193 & 54A
'50 cub demo/22 '57 cub/project
'36 F-12 '35 F-20 '39 F-14 '37 F-30
'52 C '40 B '44 BN '50 SA demo
'27 regular/steel '28 regular/rubber
'49 cub/1000 loader '50 cub/193 & 54A
'50 cub demo/22 '57 cub/project
'36 F-12 '35 F-20 '39 F-14 '37 F-30
'52 C '40 B '44 BN '50 SA demo
'27 regular/steel '28 regular/rubber
-
Eugene
- Team Cub Mentor
- Posts: 20367
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: 107 wiring ?
viewtopic.php?f=2&t=17506
Above, located at top of Cadet page. Go to IH Cadet Resources, then to manuals and or wiring diagrams.
Bat terminal on regulator should be hot. The surging at high RPMs could be a low fuel flow - so clean and adjust the carb first.
Above, located at top of Cadet page. Go to IH Cadet Resources, then to manuals and or wiring diagrams.
Bat terminal on regulator should be hot. The surging at high RPMs could be a low fuel flow - so clean and adjust the carb first.
-
oldiron29
- 10+ Years
- Posts: 109
- Joined: Wed Feb 20, 2008 6:46 am
- Location: Miller Place, NY
Re: 107 wiring ?
Follow up, I replace most of the wiring and found the battery wire from amp gauge was not connected. Also found voltage reg. had broken ground lead.
Install new ingnition key switch old one had broken termanl. Now all seems fine it is CHARGING ya!!!! still need to clean the carb oldiron29
Install new ingnition key switch old one had broken termanl. Now all seems fine it is CHARGING ya!!!! still need to clean the carb oldiron29
RED IS GOOD! BUT GRAY IS GREAT!!
'49 cub/1000 loader '50 cub/193 & 54A
'50 cub demo/22 '57 cub/project
'36 F-12 '35 F-20 '39 F-14 '37 F-30
'52 C '40 B '44 BN '50 SA demo
'27 regular/steel '28 regular/rubber
'49 cub/1000 loader '50 cub/193 & 54A
'50 cub demo/22 '57 cub/project
'36 F-12 '35 F-20 '39 F-14 '37 F-30
'52 C '40 B '44 BN '50 SA demo
'27 regular/steel '28 regular/rubber
Who is online
Users browsing this forum: No registered users and 5 guests
