CC Original Air cleaner installation

Mon May 31, 2010 8:16 pm

I am getting ready to install my newly acquired oil bath air cleaner. I am sure there is supposed to be a bolt that goes right on top of the neck of the pot metal top. What size is that bolt, and is it a special style?

Re: CC Original Air cleaner installation

Tue Jun 01, 2010 3:13 am

Pony,

I will look at mine tonight and post for you. I live in Clayton sand the tractor is up the road at folks place.

Froghunter

Re: CC Original Air cleaner installation

Wed Jun 02, 2010 9:25 pm

here is the bolt from the parts list(Screw, 1/4-20 X 5/8 Hex Hd Cap). The elbow gets stripped out and I had up to 3/8" capscrews used. If it's stripped out I take the 3 small screws off and put a nut & lock washeron a slightly longer screw.