Hey folks. Up for a new set of questions? There used to be a hydraulic angling kit for the 42" and 54" IH snow blades. Part number - 190-378-100. Contained within this kit were two angling brackets - part numbers 703-0594 IH 223349 (large diameter ram), 703-0589 IH-223346 (large diameter ram), or IH 61900 (Small diameter ram), and IH 106812 (Small Diameter Ram).
No, my 1200 Cub Cadet does not have hydraulics, but I do have a couple of extra electric actuators with 1/2" diameter holes on each of the eye ends that I intend to use for my project.
In a nutshell, I want to use the electric actuators in place of the hydraulic rams to lift and angle the snow blade from the driver's seat.
I need to know which part numbers would come closer to fitting into the electric actuators, what the size of the bracket pins might be, and if anyone might have any they'd like to sell. I know the selling part should be on the For Sale/Wanted to buy section, and I'll put something there later once I find out what I really need.
Once again, thanks for all your help. This little tractor is coming around very nicely now. If this oppressive heat would ever let up I might be able to enjoy things a bit more.