On-line Manuals for 1250 Cub Cadet

IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

On-line Manuals for 1250 Cub Cadet

Postby papermaker » Mon Aug 09, 2010 6:27 pm

Are there any sources for on-line manuals for Cub Cadets? I have a Cub Cadet 1250 and I'm trying to find out how the engine side panels connect to the tractor.
papermaker
5+ Years
5+ Years
 
Posts: 403
Joined: Wed Jan 09, 2008 6:43 pm
Location: Bucksport,Me. 04416
Zip Code: 04416
Tractors Owned: 1940 Farmall A, 1946 David Bradley,1948 F-Cub,Cub 22 Mower,194 Plow,Cub 3 Cultivator,54A Grader/Snow Blade, A-Cub 33 Bean Harvester

Re: On-line Manuals for 1250 Cub Cadet

Postby Jeff in Pa » Mon Aug 09, 2010 6:46 pm

Look in here
http://www.ccmanuals.info/pdf/

Is a 1210 close enough? ( I'm a narrow frame guy )
http://www.ccmanuals.info/pdf/1210-1810 ... Manual.pdf

Jeff
User avatar
Jeff in Pa
Cub Star
Cub Star
 
Posts: 82
Joined: Sun Jul 11, 2010 10:31 am
Location: PA, Zionsville
Zip Code: 18092
eBay ID: jrd77vet
Tractors Owned: Cub Cadet 122
Cub Cadet 125

Re: On-line Manuals for 1250 Cub Cadet

Postby Paul B » Mon Aug 09, 2010 7:54 pm

The bottom "lip" hooks inside the top of the frame rails, at the top rear of each panel is a hole for a bolt (was originally a bolt with a wing nut head for lack of a better discription) that screws into the side of the dash pedestal. At the front, there are tabs on the top of each side panel and a spring hooks into each panel (from panel to panel) holding them tight to the grill frame. The spring looks like a short screen door spring with a long end on one end.
Paul B
Team Cub Guide
Team Cub Guide
 
Posts: 2338
Joined: Sat Apr 10, 2004 6:12 pm
Location: KY, Louisville
Zip Code: 40218
Circle of Safety Award
Circle of Safety: Y

Re: On-line Manuals for 1250 Cub Cadet

Postby papermaker » Wed Aug 11, 2010 11:22 am

Thanks for the information regarding the side panels.Just trying to gather parts before tearing everything apart. The other concern I have is that the hydrostatic drive doesn't stay where you set it. I've read where there is wear in the linkage to the transmission that causes this
papermaker
5+ Years
5+ Years
 
Posts: 403
Joined: Wed Jan 09, 2008 6:43 pm
Location: Bucksport,Me. 04416
Zip Code: 04416
Tractors Owned: 1940 Farmall A, 1946 David Bradley,1948 F-Cub,Cub 22 Mower,194 Plow,Cub 3 Cultivator,54A Grader/Snow Blade, A-Cub 33 Bean Harvester


Return to Cub Cadet Forum

Who is online

Users browsing this forum: No registered users and 2 guests