This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Rear tubes - what fits?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 281
- Joined: Wed Aug 31, 2005 10:17 am
- Location: Wamego Kansas
Rear tubes - what fits?
I had to buy a tube for one of the rear tires on my 1450. I found one that would fit from TSC, the only problem is the valve stem is almost centered while the valve stem hole on the rim is offset to the outside edge of the rim. When fully inflated the valve stem is nearly pulled back inside the tire. Does anyone make tube that actually fits or should I be looking at drilling a new valve stem hole in the rim?
Freedom is for those that claim it.
- gitractorman
- 10+ Years
- Posts: 2678
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: Rear tubes - what fits?
Tubes are a pain in the A** but you should be able to twist the tube around on the rim to get the valve stem oriented correctly. You should not have to drill a new hole.
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
Who is online
Users browsing this forum: No registered users and 5 guests