I'm looking at a Creeper gearbox mounted on a CC100 Transmission (FCub). Plan is to mount it in a International 184. What is a fair and reasonable price to to pay for the creeper. I know that I'll have to change the Transmission input shaft and the tractor drive shaft.
Bill Shaver
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
CC Creeper gear box
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 55
- Joined: Mon Aug 02, 2010 1:05 pm
- Zip Code: 22802
- Tractors Owned: Cletrac HG-42 1945
Oliver HG-68 1946
M-F MF50 1959
IH 184 Loboy 1977
Farmall F Cub 1949
Farmall Cub 1957
No 1 Platform Carrier
L-F194 Plow - Location: Rockingham County, VA
CC Creeper gear box
IHCC of Virginia, Chapter 41
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: CC Creeper gear box
Its not made heavy enough to install it in a 184 tractor. The creeper tranny for the 184/154/185 is much larger/heavier size wise and parts wise too. I don't think the smaller planetary gears in the cadet creeper will hold up to the higher pressure thats put on them from the bigger tractor. I have both here and the 154 creeper is way bigger. Bill
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 10+ Years
- Posts: 55
- Joined: Mon Aug 02, 2010 1:05 pm
- Zip Code: 22802
- Tractors Owned: Cletrac HG-42 1945
Oliver HG-68 1946
M-F MF50 1959
IH 184 Loboy 1977
Farmall F Cub 1949
Farmall Cub 1957
No 1 Platform Carrier
L-F194 Plow - Location: Rockingham County, VA
Re: CC Creeper gear box
Thanks for the help. I haven't done any more on that project but am planning to rebuild the 184 transmission anyway. Bill S.
IHCC of Virginia, Chapter 41
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: CC Creeper gear box
Time to time there on ebay. I did get an extra on from ebay. I have one of my 3 int154's that has the creeper and its nice to have. Bill
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 10+ Years
- Posts: 588
- Joined: Mon Sep 17, 2007 9:06 pm
- Zip Code: 23069
- Location: Central Virginia
Re: CC Creeper gear box
I have a creeper around here that was from a 184 or 185 that I parted out several years back. Don't plan on getting any loboys again and will sell it.
Who is online
Users browsing this forum: No registered users and 6 guests