Switch to full style
IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.

Forum rules

Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post a reply

Int'l Cub Cadet 70 QUESTIONS!

Sat May 21, 2011 4:39 pm

It has shaft drive and a fresh cast iron 7HP Kohler.
What is the WIDEST deck it will handle?
Can it pull a moldboard plow?
Did they make a snow blade for this?
I'm thinking about getting one... :roll:

Re: Int'l Cub Cadet 70 QUESTIONS!

Sat May 21, 2011 7:33 pm

Anything over a 38" deck will work it if the grass gets very tall, and the 38" or 42" cast iron end decks are what it originally had, although there was a kit available from IH to put the 38" two bladed timed deck from the Original on it.

Yes it will pull a 10" Brinly plow very well.

Yes there was a snow blade for it, same blade used for all the narrow frame tractors, although there was some differences in the sub frame that mounted it on the tractor, depending on the tractor model.

Re: Int'l Cub Cadet 70 QUESTIONS!

Sat May 21, 2011 8:21 pm

Thank you!
Decision time now... :?:
Post a reply