IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Wed Jul 06, 2011 10:30 pm
I can't figure it out I have a rather large spring with a bracket on each end, I suppose it is in some way to assist the lift for the Brindly hitch, but where do it fasten to the tractor?
Thu Jul 07, 2011 4:47 am
To see the rest of the Brinly spring assisthttp://www.cubcadetcollectors.com/manuals/main.php?g2_itemId=4347&g2_imageViewsIndex=1
IH made a spring assist that mounts on the left side also
Thu Jul 07, 2011 5:26 am
It depends. If it is a spring assist, and if it is a Brinly-Hardy spring assist, it mounts like Geezer's post shows. If it is an IH spring assist, the "L" bracket mounts to the rear of the left frame rail, the other bracket to the rockshaft under the tractor, but there are two different IH spring assist, 1 for the narrow frame tractors, 1 for the wide frames. I would assume you have the one for a wide frame, but since the 1450 has a hydraulic lift, you really don't need it unless you are going to hang something very heavy on the back of the tractor. A picture would help.
Thu Jul 07, 2011 9:22 am
Thanks guys, the only thing I will ever have on the tractor is a plow and maybe a disc. I will try for a picture.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.