Page 1 of 2

Artie...color question

Posted: Sun Sep 11, 2011 12:42 pm
by JimT
I was working on Artie today and put the dash on the dash tower so I could line up the hood to mark the hole to be cut in it for the exhaust/muffler to run through the hood. I was looking at it and I think I might go with the IH-white on the hood and dash. I think it looks kinda nice like this. Keep in mind the hood and dash have not been painted yet, so I am still considering this color combination. What do ya'll think about this color combo? Here are a couple of photos to show how it might look.

Image

Image

Re: Artie...color question

Posted: Sun Sep 11, 2011 12:45 pm
by Barnyard
I like it Jim! I think it makes it stand out. Of course colors and I don't always get along. :lol: The whole project is looking good.

Re: Artie...color question

Posted: Sun Sep 11, 2011 12:55 pm
by Bigdog
I think I would stay with red and do some white pin stripes.

Re: Artie...color question

Posted: Sun Sep 11, 2011 1:04 pm
by Former Member
I like the white hood

Re: Artie...color question

Posted: Sun Sep 11, 2011 3:12 pm
by Denny Clayton
The white looks good. If you want it, go for it! If you don't like it after you try it, paint it red. It's small and won't take much paint.

Re: Artie...color question

Posted: Sun Sep 11, 2011 8:01 pm
by gitractorman
I like the white hood, however, if you went with all red, the tractor would look an awful lot like the IH Farm tractors of the period. The IH 1086 has always been one of my favorite tractors (along with others in that period):
Image

The 966 looks good too, with the white upright and hood paint:
Image

Although, this is really what you're going after, the IH 4568:
Image

There is a guy here on Grand Island with one of these, that I've been wanting to go talk to him about for years. Just an amazing machine! I'm sure yours will be too!

Re: Artie...color question

Posted: Sun Sep 11, 2011 10:30 pm
by Bill Hudson
Jim,

I like BD's suggestion of a red hood with white pinstripes.

Bill

Re: Artie...color question

Posted: Mon Sep 12, 2011 8:15 am
by Paul B
REAL Cub Cadets are yellow and white :lol: :lol: :lol: I like the white hoods/grill with yellow , but not with red. I like Bigdog's suggestion of red w/white pin stripes or maybe white accents, but it's all in what YOU like. You built the tractor for yourself, and you built it the way you wanted it, so paint it the way YOU want it, not the way "we" want it.

Re: Artie...color question

Posted: Mon Sep 12, 2011 10:12 am
by Winfield Dave
The scheme on that 4568 above is pretty cool looking...to match you could then wear a red hat with a white bill. :lol:

Re: Artie...color question

Posted: Mon Sep 12, 2011 11:11 am
by Pony Master
I am going to throw a whole new wrench in the works. I think you should paint it gold like the Demonstraters where during that time. After all this is just for Demonstration purposes :{_}:

Re: Artie...color question

Posted: Mon Sep 12, 2011 3:18 pm
by gitractorman
I thught about the demonstrator colors too:
Image

Could look pretty nice!

Also, I've thought about this same project many times for years now. I don't know what you are planning for fenders, but I always thought about taking a set of factory fenders and turning them around backwards, cutting out the seat pan portion, so they go forward from the foot rests, up over the front wheels with the reflectors facing forward. Then have a second set in the back over the rear wheels. That would give you a place to mount a set of front headlights in the fenders, just like the big tractors (with a little fabrication anyway). I'm sure you've thought of this stuff, but I'm just so excited to see someone actually doing it.

Re: Artie...color question

Posted: Mon Sep 12, 2011 7:49 pm
by Mr E

Re: Artie...color question

Posted: Tue Sep 13, 2011 5:40 am
by JimT
Thanks for the input on the paint scheme. I'm thinking the 4568 may be a good way to go.

Gitractorman I have a scale 966 but I put the black strip on it, well it's looks a little like one. :) I did take a seat pan and cut the fenders out of the it and used them for the front. Not exactly how you were talking about though.

Image

Image

Mr. E a friend of mine sent me a photo of that red cub a little while back. I like it but I think the front end is out a little too far.

Dave...not to sure about the hat idea. :mrgreen:

Re: Artie...color question

Posted: Tue Sep 13, 2011 6:58 am
by Rudi
Jim:

I actually like the paint/decal scheme of the scaled 966 with the black stripe. The black stripe would look very good on Artie especially as it is kinda a scale representation of the 2x2's (well at least from my limited viewpoint :roll: ) The red with a white stripe sounds interesting as well. I assume you are going after some custom decals?


As Paul said, it is your design, your tractor, so it has to be your choice. I am just looking forward to what you come up with. It is going to be pretty 8) for sure :D

Re: Artie...color question

Posted: Wed Sep 14, 2011 6:11 am
by gitractorman
Jim,
Yes, I thought I had seen yours with the fenders on it. That's exactly what I was talking about. I can't wait to see your finished project. As with the rest of yours, they are all amazing! I love that 966. Hmm. I've got a couple of Cadets around here. Maybe I need to work on "modifying" one.....

Awesome work!
Bill