Here is my 62 cadet I have been slowly doing. A few years have passed but I will get around to finishing it completely soon.
In this last picture, this chain holder has been on here since I got it and I don't know if it is original or not or what it would be used for. Also does anyone know what length mower deck belt it takes? The one that drives the deck from the engine. Thanks.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Thought I'd share a couple pictures
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 398
- Joined: Tue Nov 30, 2010 7:54 pm
- Zip Code: 23027
- Circle of Safety: Y
-
- 10+ Years
- Posts: 34
- Joined: Sat Mar 16, 2013 9:53 pm
- Zip Code: 44062
- Tractors Owned: IH Cub Cadet 1450
IH Cub Cadet 1450 parts
IH Cub Cadet 1250 parts
IH Cub Cadet Original
IH Cub Cadet 100
IH Cub Cadet 71
IH Cub Cadet 123
IH Cub Cadet 102
IH Cub Cadet 72
IH Cub Cadet 86
CCC 1211 - Location: Middlefield, Ohio
Re: Thought I'd share a couple pictures
Nice Original! Thanks for the pictures! Your deck drive belt is a 1/2" x 82" belt. The deck pulley belt is 1/2 x 30". I have never seen any type of bracket on any Original before. I had a O before and that was not on it.
- OliverFarmall
- 10+ Years
- Posts: 480
- Joined: Wed Jul 28, 2010 12:53 pm
- Zip Code: 18822
- eBay ID: ranger_jer
- Circle of Safety: Y
- Location: PA, Hallstead (Susquehanna County)
Re: Thought I'd share a couple pictures
Not positive as I'd have to go look at my Grandfathers old original at my cousins, but I want to remember it held a spring that went to the clutch pedal to help put back pressure on it. Not sure if it was original, but that's what I think I remember.
22 sickle bar mower x2
23A tandem disc harrow
144 cultivator (#53 & #97 spring tooth)
154 leveling and grader blade
189 moldboard plow 2-way
193 moldboard plow x2
spring tooth harrows
David Bradley planter (modded for Cub)
23A tandem disc harrow
144 cultivator (#53 & #97 spring tooth)
154 leveling and grader blade
189 moldboard plow 2-way
193 moldboard plow x2
spring tooth harrows
David Bradley planter (modded for Cub)
-
- 10+ Years
- Posts: 2338
- Joined: Sat Apr 10, 2004 6:12 pm
- Zip Code: 40218
- Circle of Safety: Y
- Location: KY, Louisville
Re: Thought I'd share a couple pictures
The bracket is not a "chain holder", but is the rear support bracket for the idler control rod for a BB-36 snow thrower. The Original did not have a front PTO clutch, so there was an idler or belt tightening clutch for the belt from the crankshaft that drove the snow thrower gear box. The rod that operated that idler locked in place on that bracket to engage or disengage the snow thrower.
Who is online
Users browsing this forum: No registered users and 7 guests