Hi - Passing some time here while Dad gets his Pacemaker installed today.
My old Cub Cadet is my next project. I know that the rear axle housings on both sides are worn so badly that Dad shimmed them with hardwood bushing in the 1970's. Are those castings, left and right still available? Perhaps, I'll have to have them sleeved?
Just can't stop thinking about my tracotor projects.
Ken
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
1960 Cadet Question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
1960 Cadet Question
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- dgrapes59
- 10+ Years
- Posts: 3736
- Joined: Sun Jul 13, 2008 10:05 pm
- Zip Code: 45067
- Tractors Owned: 1951 Cub, 2-1955 Loboy w FH, a few plows, discs, mowers, blades, carrier & such
Several '61 CC Originals, Cub Cadet 100, several 102's & 122's, 124, various CC options & implements, #1Trailer, 1963 Springfield, JD 770, Ford 8N - Circle of Safety: Y
- Location: OH, Trenton
Re: 1960 Cadet Question
Ken,
First, I hope all goes well with Dad!
The axle tubes are available used pretty reasonable, think a pair was like $20 on eBay. I may not be following your question properly, but the outer axle tubes on an Original ("O") have a replaceable bushing on the outside:
IH-376160-R1 Bushing, Rear Axle Carrier
And a seal on the inside, it is a pretty simple set-up.
You are going to have fun when you dig into it, will seem like a breeze after dealing with your Cub!
Oh, your CCO is likely a 61, believe we identified it in a prior post, but they didn't start making until '61.
Good luck,
First, I hope all goes well with Dad!
The axle tubes are available used pretty reasonable, think a pair was like $20 on eBay. I may not be following your question properly, but the outer axle tubes on an Original ("O") have a replaceable bushing on the outside:
IH-376160-R1 Bushing, Rear Axle Carrier
And a seal on the inside, it is a pretty simple set-up.
You are going to have fun when you dig into it, will seem like a breeze after dealing with your Cub!
Oh, your CCO is likely a 61, believe we identified it in a prior post, but they didn't start making until '61.
Good luck,
David
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: 1960 Cadet Question
dgrapes59 wrote:Ken,
First, I hope all goes well with Dad!
The axle tubes are available used pretty reasonable, think a pair was like $20 on eBay. I may not be following your question properly, but the outer axle tubes on an Original ("O") have a replaceable bushing on the outside:
IH-376160-R1 Bushing, Rear Axle Carrier
And a seal on the inside, it is a pretty simple set-up.
You are going to have fun when you dig into it, will seem like a breeze after dealing with your Cub!
Oh, your CCO is likely a 61, believe we identified it in a prior post, but they didn't start making until '61.
Good luck,
Thanks for the best wishes for ol'dad. You are correct on the 61 - with a serial number of 16509.....Don't have my details on my iPad - made a guess. When I dig the Cadet out of our Magic Barn, this one of the first things I will check. The last time I saw that part of this tractor was in about 1971....I was 14 and had Girls - Not Tractors on my mind !
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
-
- Team Cub Mentor
- Posts: 4128
- Joined: Tue Jan 11, 2005 12:12 pm
- Zip Code: 13830
- eBay ID: adak8965
- Circle of Safety: Y
- Location: Oxford, NY
Re: 1960 Cadet Question
I think I have a couple here if you need them.
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: 1960 Cadet Question
Cecil wrote:I think I have a couple here if you need them.
Thanks Cecil, if you can hold on to them until the magic barn fully discloses the mysteries within. Was just speaking with Dad about it - he's guessing he didn't have the money in the early 70's to fix it correctly so he used the oak shims.
Ken
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Who is online
Users browsing this forum: No registered users and 14 guests