Good day everyone; I recently purchased a tiller to mount on my 100. I also bought a 3 point hitch for the 100. Today I spent the good part of this morning trying to install the 3 point hitch, without success! The main culprit is the lift bar, I can not figure out how to mount the lift bar to the pivot point without taking the tractor apart. It is impossible to replace the cotter pin with everything in place. What am I missing? Or do you have to disassemble part of the tractor to mount this hitch? Your help will be much appreciated.
Take care,
Phil
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cadet 100 and a 3 point hitch
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- pharmerphil3
- 10+ Years
- Posts: 954
- Joined: Sat Apr 22, 2006 11:10 am
- Zip Code: 06468
- Tractors Owned: 1948 Cub
1955 Cub
1961 Cub
1963 Cub
1964 Cub Cadet 70
1969 Cub Cadet 125
100 Spreader
144 Cultivator
3 Field Cultivator
22 Sickle Mower
193 Plow
54-Plow
59 Wood's Mower
2030 John Deere - Circle of Safety: Y
- Location: CT, Monroe
- gitractorman
- 10+ Years
- Posts: 2680
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: Cadet 100 and a 3 point hitch
Phil,
Not sure if you have the manual or not, but here it is:
http://ccmanuals.info/pdf/70-100%203PT%20Install.pdf
No, you dont have to disassemble anything.
By reading through the manual, it sounds like you need to attach the lift bar to the attaching plate and install the cotter pin before bolting the attaching plate to the lift lever on the tractor. That's probably the trick, you just got ahead of yourself by bolting the attaching plate in place first.
Good luck!
Bill
Not sure if you have the manual or not, but here it is:
http://ccmanuals.info/pdf/70-100%203PT%20Install.pdf
No, you dont have to disassemble anything.
By reading through the manual, it sounds like you need to attach the lift bar to the attaching plate and install the cotter pin before bolting the attaching plate to the lift lever on the tractor. That's probably the trick, you just got ahead of yourself by bolting the attaching plate in place first.
Good luck!
Bill
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
- pharmerphil3
- 10+ Years
- Posts: 954
- Joined: Sat Apr 22, 2006 11:10 am
- Zip Code: 06468
- Tractors Owned: 1948 Cub
1955 Cub
1961 Cub
1963 Cub
1964 Cub Cadet 70
1969 Cub Cadet 125
100 Spreader
144 Cultivator
3 Field Cultivator
22 Sickle Mower
193 Plow
54-Plow
59 Wood's Mower
2030 John Deere - Circle of Safety: Y
- Location: CT, Monroe
Re: Cadet 100 and a 3 point hitch
Hey Bill, I tried that, but it would not fit through the inside channel. I will have to try again Friday. Thanks for the help.
Phil
Phil
- gitractorman
- 10+ Years
- Posts: 2680
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: Cadet 100 and a 3 point hitch
I believe you have to slide the lift arm up through the channel, then attach the arm to the attachment block, install the pin, then bolt the attachment block to the lift rod.
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
-
- 10+ Years
- Posts: 34
- Joined: Sat Mar 16, 2013 9:53 pm
- Zip Code: 44062
- Tractors Owned: IH Cub Cadet 1450
IH Cub Cadet 1450 parts
IH Cub Cadet 1250 parts
IH Cub Cadet Original
IH Cub Cadet 100
IH Cub Cadet 71
IH Cub Cadet 123
IH Cub Cadet 102
IH Cub Cadet 72
IH Cub Cadet 86
CCC 1211 - Location: Middlefield, Ohio
Re: Cadet 100 and a 3 point hitch
This can be tuff. If your standing behind the 100, the lower right bolt that holds the seat spring base to the frame.....I found it helpful to back that out......if you have a long 3/8ths bolt in there , it really limits the space the long bar has up and down. Use a shorter one if possible.
Next, I had stubborn luck using a long pair of needle nose pliers to get the pin in the pivot block. A skinny screw driver from either the top of the tractor near the implement lift stop, or at a point under the tractor you can bend the pin over just enough so it don't fall out. Try not to tighten the two cap screws that hold the pivot block...just get them started as to allow movement to get the pin in the hole. Then tighten up the two cap screws, and install the opposite end of the bar...bushing, washer, and bolt once the lift is mounted to the back of the tractor.
It is challenging, but it does come together!
Next, I had stubborn luck using a long pair of needle nose pliers to get the pin in the pivot block. A skinny screw driver from either the top of the tractor near the implement lift stop, or at a point under the tractor you can bend the pin over just enough so it don't fall out. Try not to tighten the two cap screws that hold the pivot block...just get them started as to allow movement to get the pin in the hole. Then tighten up the two cap screws, and install the opposite end of the bar...bushing, washer, and bolt once the lift is mounted to the back of the tractor.
It is challenging, but it does come together!
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Cadet 100 and a 3 point hitch
If I remember correctly the two screws go through the pivot block into the long flat lift rod. It all just fits between the lever and the frame it's tight. It's so tight this pivot will work with the pin left out.
Note, the tiller is very hard to lift. The assist spring setup is needed.
Note, the tiller is very hard to lift. The assist spring setup is needed.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
Who is online
Users browsing this forum: No registered users and 11 guests