This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
#2 tiller
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- RanchsA
- 5+ Years
- Posts: 130
- Joined: Wed Feb 11, 2015 10:38 am
- Zip Code: 48873
- Tractors Owned: 1946 Farmall A
1967 Cub Cadet 123
1968 Cub Cadet 125
1973 Cub Cadet 108
1976 Cub Cadet 1450
2014 Cub Cadet GT2042 - Location: Mid Michigan
#2 tiller
I found a #2 tiller with the lift and right angle gear box. This was off an 82 series tractor so the lift bars are different and the gear box has pulleys for 5/8" belt. My 108 uses the 3/8 belt. Is it possible to switch the drive pulley on the gear box to make this work or is there more to this than that? Everything looks like it has been barely used. I'm hoping a pulley swap proper lift bar and plate assembly and it will bolt right up.
Who is online
Users browsing this forum: No registered users and 3 guests