One of my 3 springs is broken. Are these springs available separately from the pressure plate assembly.
Thanks
Clutch pressure plate springs
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 93
- Joined: Mon Jan 25, 2016 1:14 pm
- Zip Code: 00000
-
- 10+ Years
- Posts: 6244
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Clutch pressure plate springs
Which springs? The coil ones (#11) or the flat ones (#5)?
http://farmallcub.com/rudi_cub/www.cleancomputes.com/Cub/Cub%20Parts%20Manuals/TC-37F%20Revision%206%20(08-79)/Group%20-%2007%20-%20Drive%20Train/Page-02.jpg
Where are you located? I have a "parts" clutch here in NC that might have what you need.
OOPS! Sorry...missed that your tractor is a number series!
http://farmallcub.com/rudi_cub/www.cleancomputes.com/Cub/Cub%20Parts%20Manuals/TC-37F%20Revision%206%20(08-79)/Group%20-%2007%20-%20Drive%20Train/Page-02.jpg
Where are you located? I have a "parts" clutch here in NC that might have what you need.
OOPS! Sorry...missed that your tractor is a number series!

Last edited by Dale Finch on Sun Jul 25, 2021 2:40 pm, edited 1 time in total.
-
- 10+ Years
- Posts: 1349
- Joined: Fri Jan 25, 2008 9:02 am
- Zip Code: 00000
- Circle of Safety: Y
Re: Clutch pressure plate springs
I think IH-405987-R3 is the part # for numbered series.
https://www.messicks.com/part/ih-405987-r3/spring
https://hamiltonbobs.com/cart/product/c ... ch=1103332
https://www.messicks.com/part/ih-405987-r3/spring
https://hamiltonbobs.com/cart/product/c ... ch=1103332
-
- 5+ Years
- Posts: 93
- Joined: Mon Jan 25, 2016 1:14 pm
- Zip Code: 00000
Re: Clutch pressure plate springs
Thanks to the both of you for quick replies and good info.
I am in WI but will probably go with new springs, Just discovered broken spring last evening after mowing.
Clutch was acting a little off so I removed tin by shifter lever so I could see a little bit an noticed fresh break on coil spring.
Might be able to finish the mowing season as is.
I am in WI but will probably go with new springs, Just discovered broken spring last evening after mowing.
Clutch was acting a little off so I removed tin by shifter lever so I could see a little bit an noticed fresh break on coil spring.
Might be able to finish the mowing season as is.
-
- 10+ Years
- Posts: 1349
- Joined: Fri Jan 25, 2008 9:02 am
- Zip Code: 00000
- Circle of Safety: Y
Re: Clutch pressure plate springs
Duner wrote:Might be able to finish the mowing season as is.
You might and hopefully it doesn't cause more damage requiring complete clutch and flywheel replacement.
-
- 10+ Years
- Posts: 2715
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: Clutch pressure plate springs
If you replace one, replace them all so they are all the same strength.
Here are just the springs:
https://hamiltonbobs.com/cart/product/c ... lo-boy-mm4
Here are all the individual parts minus the pressure plate:
https://hamiltonbobs.com/cart/product/c ... lo-boy-mm4
This is the assembly.
https://hamiltonbobs.com/cart/product/c ... lo-boy-mm4
Here are just the springs:
https://hamiltonbobs.com/cart/product/c ... lo-boy-mm4
Here are all the individual parts minus the pressure plate:
https://hamiltonbobs.com/cart/product/c ... lo-boy-mm4
This is the assembly.
https://hamiltonbobs.com/cart/product/c ... lo-boy-mm4
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Clutch pressure plate springs
check your drive shaft spline too.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Oil Pressure Attachment(s)
by outdoors4evr » Thu Jun 16, 2022 6:01 am » in Lo-Boy Series - 154, 184, 185 - 4
- 168
-
by outdoors4evr
Mon Jun 27, 2022 9:58 am
-
-
- 5
- 330
-
by nat
Sat Mar 19, 2022 1:59 pm
-
- 12
- 1210
-
by BigBill
Sat Feb 22, 2020 1:12 am
-
- 15
- 1061
-
by A/C guy
Sat Dec 05, 2020 2:36 pm
-
-
154 clutch question. Attachment(s)
by Dan Stuckey » Mon Mar 29, 2021 5:06 pm » in Lo-Boy Series - 154, 184, 185 - 15
- 632
-
by Dan Stuckey
Tue Mar 30, 2021 6:29 am
-
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 0 guests