Cub 154 carb and governor questions??
Posted: Fri Apr 28, 2006 7:25 pm
I have some gas leak out of my 154 carb at the weep hole after the tractor has been shut down. Is it unburnt gas running back from the cylinders or it it a needle/float problem?
I don't know if my new bumper spring in the governor is screwed in too much. The tractor idles down to low idle ok but at high idle, if you move the carb control rod and increase rpm +50 over max and let go like the manual says, it corrects instantly with no surging. The manual says 2 surges are ok. Thanks!!!
I don't know if my new bumper spring in the governor is screwed in too much. The tractor idles down to low idle ok but at high idle, if you move the carb control rod and increase rpm +50 over max and let go like the manual says, it corrects instantly with no surging. The manual says 2 surges are ok. Thanks!!!