Cub Lo-Boy 154 Carb
Moderator: Team Cub
5 posts
• Page 1 of 1
Cub Lo-Boy 154 Carb
by Scott » Wed Jul 19, 2006 9:34 pm
Will the carb from a std cub fit a 154?
On To Bigger Things-
Scott - 501 Club
- Posts: 1194
- Joined: Sun Dec 26, 2004 7:09 pm
- Location: MA, Rehoboth
- Zip Code: 02769
- eBay ID: scottdarowski
- Tractors Owned: 48 Cub
55 Cub
62 CCO
63 CCO
70 JD 112
by Don McCombs » Wed Jul 19, 2006 9:43 pm
Scotty, the choke shaft is a little different.
Don McCombs
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
-
Don McCombs - Cub Pro
- Posts: 9489
- Joined: Mon Feb 03, 2003 6:45 am
- Location: MD, Deep Creek Lake
- Zip Code: 21550
- Tractors Owned: .
"1950 Something" Farmall Cub
1977 IH Cub w/FH
1948 Farmall Super A
1951 Farmall Super C w/FH 
- Circle of Safety: Y
by John *.?-!.* cub owner » Thu Jul 20, 2006 6:22 am
Thye used a Zenith carb with cable pull for choke.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
-
John *.?-!.* cub owner - Team Cub
- Posts: 17779
- Joined: Sun Feb 02, 2003 2:09 pm
- Location: Mo, Potosi
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
by Matt Kirsch » Thu Jul 20, 2006 6:55 am
In other words, yes. You just can't use the original choke rod; you need to pick up a generic choke pull knob and cable.
- Matt Kirsch
- 501 Club
- Posts: 2936
- Joined: Tue Jun 08, 2004 3:04 pm
- Location: Rochester, NY
- Zip Code: 00000
- Circle of Safety: Y
Re: Cub Lo-Boy 154 Carb
by George Willer » Thu Jul 20, 2006 8:21 am
Scotty D wrote:Will the carb from a std cub fit a 154?
The IH carb is the same except for the choke shaft and its' bushings. It's possible to swap shafts, but the steel bushing the shaft goes through is solid on the engine side for the 154. Maybe that wouldn't matter?
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
George Willer - Cub Pro
- Posts: 7011
- Joined: Sun Feb 02, 2003 9:36 pm
- Location: OHIO, Fremont
- Zip Code: 43420
- Circle of Safety: Y
5 posts
• Page 1 of 1
Return to LoBoy Series - 154, 184, 185
Who is online
Users browsing this forum: No registered users and 1 guest
|
|