Tue Jul 17, 2007 7:32 pm
will a 154 left final exchange on a 72 reg cub?
Tue Jul 17, 2007 7:37 pm
You can't rotate a final drive housing 90 degrees - the holes won't line up.
Tue Jul 17, 2007 7:43 pm
I was wondering that too. I just purchased two extra sets of int 154 finals for $75 a pair. At $450 for a new axle i figure $75 for the whole final assembly is good. For anyone looking for INT154 parts if ralph doesn't have them here there's a guy on ebay called hamiltonbob who is stripping int154 and selling parts. You know that 154 parts are hard to find too. I purchased two front ends,w/spindles/hubs, plus 2 sets of finals, two fan assembies with bearings/brackets, gas tank, 2 hoods, dashboard, dash housing/support, hyd valve, plus more... I want to keep my int 154 going for future generations too!!!
Tue Jul 17, 2007 7:59 pm
Cub lo-boy finals will interchange. I used them on my 154, because the implement mounting holes were stripped on the originals. Ed
Tue Jul 17, 2007 8:05 pm
But you can't use them on a standard cub which is what he wants to do.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.