Sun Jul 29, 2007 12:53 am
The 154 I'm working on has a Zenith carb, same one found on the As through 140s. Is this right? The carb flange is quite a bit larger than the manifold. It doesn't look right.
Sun Jul 29, 2007 6:08 am
Brian, the Zenith carb mounting flange will be larger than the mainifold flange. Be sure that the carb throttle plate dosn't bind on the intake inside the manifold when it is bolted up. My experiance in the past is I had to find the sweet spot as I bolted it up
As for the carb The Zenith carbs were designed with 2 bolt centers and from and will fit several of the manufactures engines.
Sun Jul 29, 2007 9:27 am
I believe the 154 may have come with a Zenith originally. it is easy to tell if it is original, the manifold flange and top of carb. will be the same size. It will look simialar to an A, but should have different jets inside it.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.