Tue Jan 15, 2008 12:21 pm
I bought a blade for my 154 a while ago and it's been working great for me even though all I did was throw it on the tractor and start using it.
When I bought the blade, no bushings were included even though the TC-131 Parts Catalog shows a bunch of them. I would love to install them while I also assemble the correct set of bolts, etc. for the plow, but I haven't had any luck finding them.
Does anyone know where I can find these bushings, or what they might even be made of. Would these be something I could fabricate?
Tue Jan 15, 2008 2:36 pm
The only bushings I know of are on various pins or bolts in the lift linkage -- maybe 10 or a dozen of them. They are probably all still available but you may save some money making your own. They are made of steel. Just check the sizes of the pins/bolts and the holes they fit in and size them accordingly. I think they are all 1/2 inch ID. You may want to oversize the OD to make up for wear. The lengths are probably just a bit more than the thickness of the part they go into, so the bolt can be tightened and the parts will still be free to pivot.
Tue Jan 15, 2008 3:05 pm
That's pretty much EXACTLY the information I was looking for!
Thanks a ton!
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.