Thu Mar 05, 2009 10:47 am
Well, I finally delivered the 154 back to the neighbor (that is a whole nother story). He and I got to talking, and he said he would like to have a tiller and a loader for it. I know they are out there, but what models would I look for, and what should he expect to pay?
Thu Mar 05, 2009 12:59 pm
If you go to this site and look under parts & service click parts enter 154 gas tractor and click then look on the list to the left of the page under tiller.http://www1.caseih.com/northamerica/Pages/Home.aspx
Thu Mar 05, 2009 2:00 pm
I don't remember how your 154 is set up, but I believe you need the creeper drive for it to be very effective with a tiller.
Thu Mar 05, 2009 2:16 pm
A creeper and 3-point is required for the Model 15 Tiller.
The tiller is a big load on the tractor. I have stalled my 184 while tilling at wide open throttle in creeper gear 1.
Fri Mar 06, 2009 7:31 am
John *.?-!.* cub owner wrote:I don't remember how your 154 is set up, but I believe you need the creeper drive for it to be very effective with a tiller.
I should have mentioned that in my post sorry
As far as the 154 I have it does have a creeper drive and I use my tiller extensively, it really is an important implement for me.
I always till in first and low creeper drive with open throttle, you have to keep you hand on the hyd. control so you can adjust depth on heavy or hard soil. Sometimes you have to make a second pass to get the consistency you want in your seed bed.
As Ive said I use my tiller for lots of things, I till my compost,till leaves,till flower beds. I have even spot tilled my yard to re-seed the lawn.
Fri Mar 06, 2009 10:03 am
Jersey, sorry, my comment was to Pony Master. I should have made my self clearer.
Fri Mar 06, 2009 11:54 am
Well, unfortunately no creeper. It has 3 pt.
Sat Mar 07, 2009 8:21 am
I wonder why its called a "creeper" on the cub cadets and a "reduction gear box" on the int154's.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.