Page 1 of 1

int154 flywheel brake pucks

Posted: Tue Jul 07, 2009 9:41 am
by BigBill
You can extend the life of your worn flywheel brake pucks by drilling and tapping a 1/4-20 thread and installing a 1/4-20 round head screw in the rear side of the worn pucks. It should give us another 3/16" of puck extention towards the flywheel. (the thickness of the screw head) BB

Re: int154 flywheel brake pucks

Posted: Tue Jul 07, 2009 10:51 am
by Lance Leitzel
Hi Bill - That's a great idea!