Cadet gears in a 154 loboy
Moderator: Team Cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
3 posts
• Page 1 of 1
Cadet gears in a 154 loboy
by tklunder » Tue Jul 21, 2009 1:04 pm
I have a 154 loboy with very noisey gears and am told that cadet gears will fit right in. Does anyone have any experience with this? Will the gears and bearings interchange? Thanks, Ted
- tklunder
- 5+ Years
- Posts: 62
- Joined: Sat Jun 25, 2005 4:16 pm
Re: Cadet gears in a 154 loboy
by Bigdog » Tue Jul 21, 2009 4:08 pm
Ted - yes they will.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
Bigdog - Team Cub
- Posts: 23820
- Joined: Sun Feb 02, 2003 12:50 pm
- Location: OH, Stoutsville
- Zip Code: 43154
- Circle of Safety: Y
Re: Cadet gears in a 154 loboy
by BigBill » Tue Jul 21, 2009 4:26 pm
They will but there is a difference between the gear sets in 2nd gear diameter between the trannys with some of them but i'm not sure which ones have it. Just something to think about if you mix and match gear sets to use the best gears. "hamiltonbob" on ebay has tranny's and gear sets for the int154 too.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
- BigBill
- 5+ Years
- Posts: 5705
- Joined: Sat Jul 22, 2006 5:02 pm
- Location: in northern usa
- Zip Code: 00000
3 posts
• Page 1 of 1
Return to LoBoy Series - 154, 184, 185
Who is online
Users browsing this forum: No registered users and 2 guests
|
|