This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub 154 PTO and 3 Point
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 469
- Joined: Sat Jun 23, 2007 2:14 pm
- Location: West Seneca, NY
Cub 154 PTO and 3 Point
I have a cub 154 which has many good parts on it. I would like to move them out of my shop. I have complete working PTO as well as most of a 3 point hitch. Other parts like transmission, clutch, pressure plate etc. If you need something let me know by PM.
1956 Farmall Cub,1952 Cub Hi Crop, 1959 Case 420b, 1960 Case 530ck Backhoe
-
- 10+ Years
- Posts: 37
- Joined: Sat Dec 17, 2005 7:25 am
- Zip Code: 43522
- Location: Grand Rapids Ohio (Toledo area)
Re: Cub 154 PTO and 3 Point
Mike
what are you asking for the 3point ?
George IH48
what are you asking for the 3point ?
George IH48
Buying cheap tools to save money , is like setting the clock back to save TIME.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Cub 154 PTO and 3 Point
What year is the tractor? There are older 154's and newer 154's some of the parts are different but some will interchange too. The clutch/pto shafts are different lenghts and the PTO belt take off is different between the older and the newer too.
The newer has a black decal on the hood and the older has the blue decal on the hood. Also the hydraulic return line goes to the tranny top cover on the newer one and on the older one it goes to the suction line. I believe its the '69 and back is the older and '70 and newer is the newer designs. I have two late '60's and one early '70's int154's sitting here and this is the only difference that i can see between the two.
The newer has a black decal on the hood and the older has the blue decal on the hood. Also the hydraulic return line goes to the tranny top cover on the newer one and on the older one it goes to the suction line. I believe its the '69 and back is the older and '70 and newer is the newer designs. I have two late '60's and one early '70's int154's sitting here and this is the only difference that i can see between the two.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
- Rick Prentice
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
- Contact:
Re: Cub 154 PTO and 3 Point
Hey Bill, does your older ones have the single or double brake pedals? George and I found that issue too. One 154 at my house has the single pedal and a friend's 154 has duals. The single pedal setup has an additional crossshaft for the clutch pedal and a different linkage.
Rick
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Cub 154 PTO and 3 Point
One of my older 154's has dual brake pedals/creeper while my other older 154 doesn't and my newer 154 doesn't have it also. I just purchased two sets of dual brake pedals from hamiltonbobscubs on ebay. I guess it was an option on the int154's. I got stuck once with the 154 with the dual brake pedals and i applied presssure to the brake with the spinning wheel and the other wheel that had traction pulled it out. I figure now that having dual brakes isn't an option its a gotta have thing for the 154's.
I guess that IH kept the int154's like the cub cadet line everything was an option.
I guess that IH kept the int154's like the cub cadet line everything was an option.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 10+ Years
- Posts: 469
- Joined: Sat Jun 23, 2007 2:14 pm
- Location: West Seneca, NY
Re: Cub 154 PTO and 3 Point
IH48 wrote:Mike
what are you asking for the 3point ?
George IH48
$500
1956 Farmall Cub,1952 Cub Hi Crop, 1959 Case 420b, 1960 Case 530ck Backhoe
-
- 10+ Years
- Posts: 469
- Joined: Sat Jun 23, 2007 2:14 pm
- Location: West Seneca, NY
Re: Cub 154 PTO and 3 Point
BigBill wrote:What year is the tractor? There are older 154's and newer 154's some of the parts are different but some will interchange too. The clutch/pto shafts are different lenghts and the PTO belt take off is different between the older and the newer too.
The newer has a black decal on the hood and the older has the blue decal on the hood. Also the hydraulic return line goes to the tranny top cover on the newer one and on the older one it goes to the suction line. I believe its the '69 and back is the older and '70 and newer is the newer designs. I have two late '60's and one early '70's int154's sitting here and this is the only difference that i can see between the two.
It is a 1973.
1956 Farmall Cub,1952 Cub Hi Crop, 1959 Case 420b, 1960 Case 530ck Backhoe
-
- 10+ Years
- Posts: 75
- Joined: Tue Jun 26, 2007 6:08 am
Re: Cub 154 PTO and 3 Point
Mike
Did you sell these 2 154 cubs?
Thanks
Hamiltonbob
Did you sell these 2 154 cubs?
Thanks
Hamiltonbob
for quality IH Cub loboy 154, 184, 185 parts visit http://www.hamiltonbobscubs.com
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 9 guests